Level: Beginner

Approx. Duration: 4 Hours

Class Enrollment Closure: 3 days prior to date of class. Any last minute enrollments must be approved prior to sign up.

Age Requirement: 16+ (Anyone under the age of 18 must be accompanied to class by a parent/legal guardian to sign a waiver on their behalf.)

Instructor: Boogie Rocco

In this introductory class, students will fashion their own classic belt from genuine leather.

Learn about the properties of vegetable tanned leather, leatherworking tools, basic principles of cutting and finishing, and how to install a removeable buckle.

You will also have the option to add decorative stamping of letters or shapes.

Beginner friendly. No prior experience with leatherworking needed. All materials for this class will be supplied to students by The Forge.

*If possible, bring a belt that fits you well. This will help us cut the exact size for you.

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the instructor:

Boogie Rocco is a leather fashion designer with over 20 years of experience. She is the creator of leather fashion brand Electric Warrior, specializing in bespoke guitar straps and accessories. 

Level: Intermediate

Prerequisite: Intro to MIG Welding, or prior outside MIG welding experience. Please do not enroll if you do not meet these requirements.

Approx. Duration: 8 Hours with a break for lunch. Lunch provided.

Class Enrollment Closure & Minimum: Enrollment closes 3 days prior to date of class. Any last minute enrollments must be approved prior to sign up. This class is subject to a minimum enrollment requirement set by the instructor. Please note that any session may be rescheduled or cancelled if not enough students are enrolled.

Age Requirement: 16+ (Anyone under the age of 18 must be accompanied to class by a parent/legal guardian to sign a waiver on their behalf.)

Instructor: Various

In this Metal Shop intensive, students will learn how to fabricate an end table base out of mild steel. This is a complete start to finish project that outlines all necessary steps from planning, preparing, fabricating and finishing, which will result in a 24” x 18” table base.

Students will learn how to read a drawing, measure, cut, drill, tap, layout, clamp, weld, and blend. You will also become familiar with a wide array of metalworking tools such as:

• Measuring tools

• Horizontal band saw

• Drill press

• Taps

• Clamps

• MIG welder

• Angle grinder and cut off wheel

• Pneumatic tools

All materials and PPE will be provided, and a pizza lunch is provided.

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

Level: Beginner

Approx. Duration: 5 Hours (w/ half hour lunch break included)

Age Requirement: 16+

Instructor: Jenny Cramer

Learn the incredible art of silversmithing, and take home your very own sterling jewelry!

In this fun, beginner friendly class, you will learn and practice the core skills of silversmithing. All the tools and materials you need will be provided in the class.

You will learn:

• Foundational skills and techniques of silversmithing

• How to make (and take home) a set of sterling silver stacking rings

• How to make (and take home) your very own ring with a bezel set stone

You will be introduced to important techniques and tools, including torches to heat the metal.

After class, you’ll go home with all of your new handmade sterling silver jewelry, a packet full of resources on suppliers, trouble shooting tips, and reference sheets for the skills you acquired in class, as well as access to Jenny’s online beginner’s silversmithing course so you can refer back to video recorded content of the steps we cover in class. 

Plan ahead for your class:

• Be sure and wear closed toed shoes, long pants and tie your long hair up.

• There will be a short break for lunch, which your instructor will give you a 30 minute notice for. Please bring something to eat that does not require heating, or plan to have your lunch delivered for the time advised by your instructor.

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the Instructor:

Jenny Cramer is a full-time silversmith, operating her jewelry business Sedona Rose Studio from her home in the hills outside of Nashville. You can check out her Instagram, as well. She has taught silversmithing to hundreds of students in-person and online, many of whom have gone on to create jewelry businesses of their own. She wants to share her love for this trade and the fulfillment it brings with as many people as possible. 

Level: Beginner

Approx. Duration: 9 Total Hours, divided into 3 sessions. This class is 3 parts, each a 3-hour session on particular dates. You must attend all dates to complete your project, and you must attend the first day in order to proceed.

Class Enrollment Closure: 3 days prior to date of class. Any last minute enrollments must be approved prior to sign up.

Age Requirement: 16+ (Anyone under the age of 18 must be accompanied by a parent/legal guardian who is also enrolled in the class.)

Instructor: David Amundson

Get down the fundamentals of woodworking by creating your own custom wood keepsake box with lid! This class is a project-based introduction to woodworking, where students will learn to cut, assemble, and glue a mitered box with splines on each corner.

Students will choose from a wide selection of wood species / grain and will gain experience with table saw and advanced techniques, compound meter saw, band saw, router table, and sanders to complete their own unique box measuring roughly 9" L x 6 "W x 4" H.

Class Outline:

• Session 1: Introduction, wood selection, constructing the box body.

• Session 2: Constructing the box lid.

• Session 3: Completing the finish to achieve a professional-look.

All tools & materials are provided by The Forge.

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the instructor:

As The Forge Nashville’s Wood Shop Director, David Amundson strives to create a culture of safety, creativity, and excellence in craft. He is former licensed architect with over 20 years experience in teaching the joys of woodworking, while also implementing best practices in shop safety.

Level: Beginner

Approx. Duration: 3 hours

Age Requirement: 14+ (Anyone under the age of 16 must be accompanied by a parent/legal guardian who will remain present for the duration of the class. Under the age of 18 must be accompanied to class by a parent/legal guardian to sign a waiver on their behalf.)g

Instructor: Jared Moran

Begin your introduction into the art of wood turning with Jared Moran of Wildland Woodworks! We will cover the basics of the lathe, lathe tools and accessories. We will start with a discussion of various holding techniques and proper form for safety. Students will practice these new skills by turning a honey dipper on the lathe which they will take home after sanding and sealing.

The maximum number of students is 3, so that each student receives one-on-one instruction. Class tuition includes all materials.

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the Instructor:

Jared Moran of Wildland Woodworks is a self taught turner from Bowling Green, KY. He uses only local wood in his shop. His work is defined by a desire to highlight the natural colors and features of each wood species. 

Level: Beginner

Approx. Duration: 3 hours

Age Requirement: 14+ (Anyone under the age of 16 must be accompanied by a parent/legal guardian who will remain present for the duration of the class. Under the age of 18 must be accompanied to class by a parent/legal guardian to sign a waiver on their behalf.)g

Instructor: Jared Moran

Begin your introduction into the art of wood turning with Jared Moran of Wildland Woodworks!

We will cover the basics of the lathe, lathe tools and accessories. We will start with a discussion of various holding techniques and proper form for safety. Students will practice these new skills by turning a bud vase on the lathe which they will take home after sanding and sealing.

The maximum number of students is three, so that each student receives one on one instruction, each on their own dedicated lathe.

Class tuition includes all materials.

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the Instructor:

Jared Moran of Wildland Woodworks is a self taught turned from Bowling Green, KY. He uses only local wood in his shop. His work is defined by a desire to highlight the natural colors and features of each wood species. 

Level: Beginner

Approx. Duration: 8 hours (with a lunch break included)

Age Requirement: 14+ (Anyone under the age of 16 must be accompanied by a parent/legal guardian who will remain present for the duration of the class. Under the age of 18 must be accompanied to class by a parent/legal guardian to sign a waiver on their behalf.)g

Instructor: Jared Moran

Begin your intensive introduction into the art of wood turning with Jared Moran of Wildland Woodworks! We will cover the basics of the lathe, lathe tools and accessories. We will start with a discussion of various holding techniques, how to prepare bowl blanks and a discussion on design. Students will continue mastering skills by turning bowls on the lathe, which they will take home after sanding and sealing them. The maximum number of students is three, so that each student receives one on one instruction, each on a lathe of their own.

Class tuition includes all materials.

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the Instructor:

Jared Moran of Wildland Woodworks is a self taught turner from Bowling Green, KY. He uses only local wood in his shop. His work is defined by a desire to highlight the natural colors and features of each wood species. 

Level: Beginner

Approx. Duration: 3 Hours

Age Requirement: 12+ (Anyone under the age of 18 must be accompanied to class by a parent/legal guardian to sign a waiver on their behalf.)

Instructor: Stacy Wiatrak

Learn the theories and concepts utilized in professional floral design, and create your own take-home floral arrangement from flowers of seasonal varieties and colors.

Instructor Stacy Wiatrak will discuss and demonstrate how to employ each element using a variety of materials, as well as specifics about the care and handling of various florals and greenery.

All tools and materials will be provided by The Forge.

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the Instructor:

Stacy Wiatrak is a highly accomplished floral designer and instructor who carries multiple distinctions through her professional journey. As the founder of esteemed flower shop Laurel and Leaf, she has specialized in custom arrangements for her impressive client list. Stacy has received accolades for her work, including being listed in the top 20 florists in the South by Southern Living Magazine, named Voter’s Choice in Nashville House and Home Magazine for five consecutive years, and consistently placed in the top three florists on Yelp. Her instructor credentials include workshops for corporate groups, community groups, schools, and even private gatherings. She is now semi-retired and enjoying traveling with her husband.

Read more about Stacy’s accomplishments in Southern Living and House And Home Nashville.

Level: Beginner

Approx. Duration: 8 Hours (2 Consecutive 4-Hour Sessions). This class is 2 parts, each a 4-hour session on consecutive days. You must attend both dates to complete your project, and you must attend the first day in order to proceed.

Instructor: Travis Curtis

Learn the timeless art of traditional Windsor-style woodworking by constructing your own Windsor bench! Build upon your fundamental woodworking skills, or arrive a complete beginner. Furniture builder Travis Curtis will share his expertise and guide you through the tools and techniques of an historical heritage craft.

This intensive two-part class will result in a fully functional and beautiful bench, made of walnut wood and thoughtfully constructed using both modern and authentic methods. Students will take home their creation to finish with paint, staining, or sealing.

You will learn:

• Basic Windsor terminology

• Drilling & reaming compound leg joints

• Drilling compound stretcher joints

• Undercarriage joinery

• Set up and use of spokeshave

All needed materials for this class will be supplied to students by The Forge.

All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the Instructor:

Travis E. Curtis is a Nashville native who enjoys making Windsor chairs in both traditional and modern styles. His grandfather, Edward L. Curtis, worked in the finishing department of Gibson Guitar Co. and his grandmother, Charlesie Marie Curtis, was a master carver for Davis Cabinet Co. Both grandparents instilled a love for woodworking, knowledge, and pride in craftsmanship in Travis from an early age. A lifelong amateur turned professional in 2012, he designs and builds Windsor chairs and furniture in his Whites Creek, TN workshop.

Level: Beginner

Approx. Duration: 3 hours

Age Requirement: 14+ (Anyone under the age of 16 must be accompanied by a parent/legal guardian who will remain present for the duration of the class. Under the age of 18 must be accompanied to class by a parent/legal guardian to sign a waiver on their behalf.)g

Instructor: Jared Moran

Begin your introduction into the art of wood turning with Jared Moran of Wildland Woodworks!

We will cover the basics of the lathe, lathe tools and accessories. We will start with a discussion of various holding techniques and proper form for safety. Students will practice these new skills by turning a bud vase on the lathe which they will take home after sanding and sealing.

The maximum number of students is three, so that each student receives one on one instruction, each on their own dedicated lathe.

Class tuition includes all materials.

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the Instructor:

Jared Moran of Wildland Woodworks is a self taught turned from Bowling Green, KY. He uses only local wood in his shop. His work is defined by a desire to highlight the natural colors and features of each wood species. 

Level: Beginner

Approx. Duration: 8 Hours (2 Consecutive 4-Hour Sessions). This class is 2 parts, each a 4-hour session on consecutive days. You must attend both dates to complete your project, and you must attend the first day in order to proceed.

Instructor: Travis Curtis

Learn the timeless art of traditional Windsor-style woodworking by constructing your own Windsor bench! Build upon your fundamental woodworking skills, or arrive a complete beginner. Furniture builder Travis Curtis will share his expertise and guide you through the tools and techniques of an historical heritage craft.

This intensive two-part class will result in a fully functional and beautiful bench, made of walnut wood and thoughtfully constructed using both modern and authentic methods. Students will take home their creation to finish with paint, staining, or sealing.

You will learn:

• Basic Windsor terminology

• Drilling & reaming compound leg joints

• Drilling compound stretcher joints

• Undercarriage joinery

• Set up and use of spokeshave

All needed materials for this class will be supplied to students by The Forge.

All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the Instructor:

Travis E. Curtis is a Nashville native who enjoys making Windsor chairs in both traditional and modern styles. His grandfather, Edward L. Curtis, worked in the finishing department of Gibson Guitar Co. and his grandmother, Charlesie Marie Curtis, was a master carver for Davis Cabinet Co. Both grandparents instilled a love for woodworking, knowledge, and pride in craftsmanship in Travis from an early age. A lifelong amateur turned professional in 2012, he designs and builds Windsor chairs and furniture in his Whites Creek, TN workshop.

Level: Beginner

Approx. Duration: 6 Hours (2 3-hour Weekly Sessions). This class is 2 parts, each a 3-hour session on consecutive weeks. You must attend both dates to complete your project, and you must attend the first day in order to proceed.

Age Requirement: 16+ (Anyone under the age of 18 must be accompanied by a parent/legal guardian who is also enrolled in the class.)

Instructor: Sarah Bogdal

In this hands-on workshop, you will explore the exciting world of Linocut Printmaking! Learn how to draw, transfer, carve and print your own design, leaving with your very own carved block and custom prints.

Instructor Sarah Bogdal will take you through a historical perspective of printmaking, relief and linocut, moving on to an in-depth look at materials, and finally guiding you through the process of successful carving and printing.

Students will leave with their own carved block, three custom prints created from the block, and resourceful materials distributed in the class for ongoing reference.

No prior experience required, open to all levels.

The Forge is grateful for our partnership with Paper & Ink Arts, in which all materials and instruction are fully sponsored, and included as part of the class fee.

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the instructor:

Sarah Bogdal is a printmaker living and working in Nashville, Tennessee. Her practice is shaped by the joy of the process: every linoleum block is a visual puzzle of light, texture, and space. She earned her BFA from Watkins College of Art in 2018 and has since exhibited her work in 16 states, tabled at dozens of art markets across the Southeast, and regularly hosts workshops to recruit others into the cult that is print. Sarah's goal is for each print to lie just shy of disorienting—visually dense enough to require a second look, rewarding those who let themselves linger. You can view her work at www.spaghettibolognese.work, or on Instagram @spaghetti_bolognese

Level: Beginner

Approx. Duration: 9 Total Hours, divided into 3 sessions. This class is 3 parts, each a 3-hour session on particular dates. You must attend all dates to complete your project, and you must attend the first day in order to proceed.

Class Enrollment Closure: 3 days prior to date of class. Any last minute enrollments must be approved prior to sign up.

Age Requirement: 16+ (Anyone under the age of 18 must be accompanied by a parent/legal guardian who is also enrolled in the class.)

Instructor: David Amundson

Get down the fundamentals of woodworking by creating your own custom wood keepsake box with lid! This class is a project-based introduction to woodworking, where students will learn to cut, assemble, and glue a mitered box with splines on each corner.

Students will choose from a wide selection of wood species / grain and will gain experience with table saw and advanced techniques, compound meter saw, band saw, router table, and sanders to complete their own unique box measuring roughly 9" L x 6 "W x 4" H.

Class Outline:

• Session 1: Introduction, wood selection, constructing the box body.

• Session 2: Constructing the box lid.

• Session 3: Completing the finish to achieve a professional-look.

All tools & materials are provided by The Forge.

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the instructor:

As The Forge Nashville’s Wood Shop Director, David Amundson strives to create a culture of safety, creativity, and excellence in craft. He is former licensed architect with over 20 years experience in teaching the joys of woodworking, while also implementing best practices in shop safety.

Level: Beginner

Approx. Duration: 3 hours

Age Requirement: 14+ (Anyone under the age of 16 must be accompanied by a parent/legal guardian who will remain present for the duration of the class. Under the age of 18 must be accompanied to class by a parent/legal guardian to sign a waiver on their behalf.)g

Instructor: Jared Moran

Begin your introduction into the art of wood turning with Jared Moran of Wildland Woodworks!

We will cover the basics of the lathe, lathe tools and accessories. We will start with a discussion of various holding techniques and proper form for safety. Students will practice these new skills by turning a candlestick on the lathe which they will take home after sanding and sealing.

The maximum number of students is three, so that each student receives one on one instruction on a dedicated lathe of their own.

Class tuition includes all materials.

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the Instructor:

Jared Moran of Wildland Woodworks is a self taught turner from Bowling Green, KY. He uses only local wood in his shop. His work is defined by a desire to highlight the natural colors and features of each wood species. 

Level: Beginner

Approx. Duration: 3 hours

Age Requirement: 14+ (Anyone under the age of 16 must be accompanied by a parent/legal guardian who will remain present for the duration of the class. Under the age of 18 must be accompanied to class by a parent/legal guardian to sign a waiver on their behalf.)

Instructor: Jared Moran

Begin your introduction into the art of wood turning with Jared Moran of Wildland Woodworks!

We will cover the basics of the lathe, lathe tools and accessories. We will start with a discussion of various holding techniques and proper form for safety. Students will practice these new skills by turning a French Rolling Pin on the lathe which they will take home after sanding and sealing.

The maximum number of students is three, so that each student receives one on one instruction on a dedicated lathe of their own.

Class tuition includes all materials.

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the Instructor:

Jared Moran of Wildland Woodworks is a self taught turner from Bowling Green, KY. He uses only local wood in his shop. His work is defined by a desire to highlight the natural colors and features of each wood species. 

Level: Beginner

Approx. Duration: 8 hours (with a lunch break included)

Age Requirement: 14+ (Anyone under the age of 16 must be accompanied by a parent/legal guardian who will remain present for the duration of the class. Under the age of 18 must be accompanied to class by a parent/legal guardian to sign a waiver on their behalf.)g

Instructor: Jared Moran

Begin your intensive introduction into the art of wood turning with Jared Moran of Wildland Woodworks! We will cover the basics of the lathe, lathe tools and accessories. We will start with a discussion of various holding techniques, how to prepare bowl blanks and a discussion on design. Students will continue mastering skills by turning bowls on the lathe, which they will take home after sanding and sealing them. The maximum number of students is three, so that each student receives one on one instruction, each on a lathe of their own.

Class tuition includes all materials.

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the Instructor:

Jared Moran of Wildland Woodworks is a self taught turner from Bowling Green, KY. He uses only local wood in his shop. His work is defined by a desire to highlight the natural colors and features of each wood species. 

Level: Beginner

Approx. Duration: 6 Hours (2 3-hour Weekly Sessions). This class is 2 parts, each a 3-hour session on consecutive weeks. You must attend both dates to complete your project, and you must attend the first day in order to proceed.

Age Requirement: 16+ (Anyone under the age of 18 must be accompanied by a parent/legal guardian who is also enrolled in the class.)

Instructor: Sarah Bogdal

In this hands-on workshop, you will explore the exciting world of Linocut Printmaking! Learn how to draw, transfer, carve and print your own design, leaving with your very own carved block and custom prints.

Instructor Sarah Bogdal will take you through a historical perspective of printmaking, relief and linocut, moving on to an in-depth look at materials, and finally guiding you through the process of successful carving and printing.

Students will leave with their own carved block, three custom prints created from the block, and resourceful materials distributed in the class for ongoing reference.

No prior experience required, open to all levels.

The Forge is grateful for our partnership with Paper & Ink Arts, in which all materials and instruction are fully sponsored, and included as part of the class fee.

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the instructor:

Sarah Bogdal is a printmaker living and working in Nashville, Tennessee. Her practice is shaped by the joy of the process: every linoleum block is a visual puzzle of light, texture, and space. She earned her BFA from Watkins College of Art in 2018 and has since exhibited her work in 16 states, tabled at dozens of art markets across the Southeast, and regularly hosts workshops to recruit others into the cult that is print. Sarah's goal is for each print to lie just shy of disorienting—visually dense enough to require a second look, rewarding those who let themselves linger. You can view her work at www.spaghettibolognese.work, or on Instagram @spaghetti_bolognese

Level: Beginner

Approx. Duration: 3 hours

Age Requirement: 14+ (Anyone under the age of 16 must be accompanied by a parent/legal guardian who will remain present for the duration of the class. Under the age of 18 must be accompanied to class by a parent/legal guardian to sign a waiver on their behalf.)g

Instructor: Jared Moran

Begin your introduction into the art of wood turning with Jared Moran of Wildland Woodworks!

We will cover the basics of the lathe, lathe tools and accessories. We will start with a discussion of various holding techniques and proper form for safety. Students will practice these new skills by turning a candlestick on the lathe which they will take home after sanding and sealing.

The maximum number of students is three, so that each student receives one on one instruction on a dedicated lathe of their own.

Class tuition includes all materials.

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the Instructor:

Jared Moran of Wildland Woodworks is a self taught turner from Bowling Green, KY. He uses only local wood in his shop. His work is defined by a desire to highlight the natural colors and features of each wood species. 

Level: Beginner

Approx. Duration: 3 hours

Age Requirement: 14+ (Anyone under the age of 16 must be accompanied by a parent/legal guardian who will remain present for the duration of the class. Under the age of 18 must be accompanied to class by a parent/legal guardian to sign a waiver on their behalf.)

Instructor: Jared Moran

Begin your introduction into the art of wood turning with Jared Moran of Wildland Woodworks!

We will cover the basics of the lathe, lathe tools and accessories. We will start with a discussion of various holding techniques and proper form for safety. Students will practice these new skills by turning a French Rolling Pin on the lathe which they will take home after sanding and sealing.

The maximum number of students is three, so that each student receives one on one instruction on a dedicated lathe of their own.

Class tuition includes all materials.

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the Instructor:

Jared Moran of Wildland Woodworks is a self taught turner from Bowling Green, KY. He uses only local wood in his shop. His work is defined by a desire to highlight the natural colors and features of each wood species. 

Level: Beginner

Approx. Duration: 8 Hours

Age Requirement: 14+ (Anyone under the age of 16 must be accompanied by a parent/legal guardian who will remain present for the duration of the class. Under the age of 18 must be accompanied to class by a parent/legal guardian to sign a waiver on their behalf.)g

Instructor: Jared Moran

Begin your intensive introduction into the art of wood turning with Jared Moran of Wildland Woodworks!

We will cover the basics of the lathe, lathe tools and accessories. We will start with a discussion of various holding techniques, how to prepare vase blanks and a discussion on design. Students will continue mastering skills by turning vases on the lathe, which they will take home after sanding and sealing them.

The maximum number of students is three, so that each student receives one on one instruction, each on a lathe of their own.

We will provide a light lunch. Please bring your beverages for the day. All tools and materials for this class will be supplied to students by The Forge.

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the instructor:

Jared Moran of Wildland Woodworks is a self taught turned from Bowling Green, KY. He uses only local wood in his shop. His work is defined by a desire to highlight the natural colors and features of each wood species. 

Level: Beginner

Approx. Duration: 4 Hours

Class Enrollment Closure: 3 days prior to date of class. Any last minute enrollments must be approved prior to sign up.

Age Requirement: 16+ (Anyone under the age of 18 must be accompanied to class by a parent/legal guardian to sign a waiver on their behalf.)

Instructor: Boogie Rocco

In this introductory class, students will fashion their own classic belt from genuine leather.

Learn about the properties of vegetable tanned leather, leatherworking tools, basic principles of cutting and finishing, and how to install a removeable buckle.

You will also have the option to add decorative stamping of letters or shapes.

Beginner friendly. No prior experience with leatherworking needed. All materials for this class will be supplied to students by The Forge.

*If possible, bring a belt that fits you well. This will help us cut the exact size for you.

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the instructor:

Boogie Rocco is a leather fashion designer with over 20 years of experience. She is the creator of leather fashion brand Electric Warrior, specializing in bespoke guitar straps and accessories. 

Level: Beginner

Approx. Duration: 9 Total Hours, divided into 3 sessions. This class is 3 parts, each a 3-hour session on particular dates. You must attend all dates to complete your project, and you must attend the first day in order to proceed.

Class Enrollment Closure: 3 days prior to date of class. Any last minute enrollments must be approved prior to sign up.

Age Requirement: 16+ (Anyone under the age of 18 must be accompanied by a parent/legal guardian who is also enrolled in the class.)

Instructor: David Amundson

Get down the fundamentals of woodworking by creating your own custom wood keepsake box with lid! This class is a project-based introduction to woodworking, where students will learn to cut, assemble, and glue a mitered box with splines on each corner.

Students will choose from a wide selection of wood species / grain and will gain experience with table saw and advanced techniques, compound meter saw, band saw, router table, and sanders to complete their own unique box measuring roughly 9" L x 6 "W x 4" H.

Class Outline:

• Session 1: Introduction, wood selection, constructing the box body.

• Session 2: Constructing the box lid.

• Session 3: Completing the finish to achieve a professional-look.

All tools & materials are provided by The Forge.

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the instructor:

As The Forge Nashville’s Wood Shop Director, David Amundson strives to create a culture of safety, creativity, and excellence in craft. He is former licensed architect with over 20 years experience in teaching the joys of woodworking, while also implementing best practices in shop safety.

Level: Beginner

Approx. Duration: 3 Hours

Class Enrollment Closure: 3 days prior to date of class. Any last minute enrollments must be approved prior to sign up.

Age Requirement: 10+ (Anyone under the age of 18 must be accompanied by a parent/legal guardian who is also enrolled in the class.)

Instructor: Martha Morales Purucker

Join us for a fun and engaging class where you will transform glass into your own work of art! This hands-on workshop welcomes participants of all skill levels to experience working with fused glass. Through guided instruction and creative exploration, you’ll learn the essential techniques to design and create a stunning decorative item of your choice.

Choose from 3 different pieces to create - A mini sculptural bowl, a mini trinket dish, or a votive candle holder!

All materials for this class will be supplied to students by The Forge.

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the instructor:

Martha Morales Purucker is a fused glass artist with over a decade of experience transforming glass into art. Inspired by her Mexican roots and honed through years of learning from glass masters, she creates vibrant pieces that inspire joy and showcase the magic of glass. You can view her work at www.glassvilletn.com

Level: Beginner

Approx. Duration: 3 hours

Age Requirement: 14+ (Anyone under the age of 16 must be accompanied by a parent/legal guardian who will remain present for the duration of the class. Under the age of 18 must be accompanied to class by a parent/legal guardian to sign a waiver on their behalf.)g

Instructor: Jared Moran

Begin your introduction into the art of wood turning with Jared Moran of Wildland Woodworks!

We will cover the basics of the lathe, lathe tools and accessories. We will start with a discussion of various holding techniques and proper form for safety. Students will practice these new skills by turning a bud vase on the lathe which they will take home after sanding and sealing.

The maximum number of students is three, so that each student receives one on one instruction, each on their own dedicated lathe.

Class tuition includes all materials.

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the Instructor:

Jared Moran of Wildland Woodworks is a self taught turned from Bowling Green, KY. He uses only local wood in his shop. His work is defined by a desire to highlight the natural colors and features of each wood species. 

Level: Intermediate

Prerequisite: Silversmithing for Beginners - Please do not enroll if you do not meet these requirements.

Approx. Duration: 5 Hours (w/ half hour lunch break included)

Class Enrollment Closure & Minimum: Enrollment closes 3 days prior to date of class. Any last minute enrollments must be approved prior to sign up. This class is subject to a minimum enrollment requirement set by the instructor. Please note that any session may be rescheduled or cancelled if not enough students are enrolled.

Age Requirement: 18+

Instructor: Jenny Cramer

Bring your new silversmithing skills to the next level! As an intermediate level silversmith, you will learn to make a pair of earrings and a necklace. Apply your base of knowledge while experimenting with new techniques and design elements.

You will learn:

• Intermediate skills and techniques of silversmithing

• How to make (and take home) a pair of sterling silver earrings with either a post-back or earring wires

• How to make (and take home) your very own sterling silver pendant necklace

You will be using torches to heat the metal, and working with other hot materials.

After class, you’ll go home with all of your new handmade sterling silver jewelry, a packetfull of resources on suppliers, troubleshooting tips, and reference sheets for the skills you acquired in class, as well as access to Jenny’s online intermediate silversmithing course so you can refer back to video recorded content of the steps we cover in class. 

All tools, materials and PPE are included in the class fee.

Plan ahead for your class:

• Be sure and wear closed toed shoes, long pants and tie your long hair up.

• There will be a short break for lunch, which your instructor will give you a 30 minute notice for. Please bring something to eat that does not require heating, or plan to have your lunch delivered for the time advised by your instructor.

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the Instructor:

Jenny Cramer is a full-time silversmith, operating her jewelry business Sedona Rose Studio from her home in the hills outside of Nashville. You can check out her Instagram, as well. She has taught silversmithing to hundreds of students in-person and online, many of whom have gone on to create jewelry businesses of their own. She wants to share her love for this trade and the fulfillment it brings with as many people as possible. 

Level: Intermediate

Prerequisite: Please do not enroll in this class without prior woodworking experience. You must be comfortable using the table saw.

Approx. Duration: 3 Hours

Class Enrollment Closure: 3 days prior to date of class. Any last minute enrollments must be approved prior to sign up.

Age Requirement: 16+ (Anyone under the age of 18 must be accompanied by a parent/legal guardian who is also enrolled in the class.)

Instructor: David Amundson

This intermediate level class will hone in on the technique of traditional woodworking joints - the mortise and tenon joint. Learn to produce a tight-fitting mortise and tenon joinery using the table saw and hollow chisel mortiser.

Your lesson will result in new knowledge and practice with creating a joinery sample. There is no project for this class, but your new found knowledge can be applied to your future woodworking projects and practices!

All tools & materials are provided by The Forge.

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the instructor:

As The Forge Nashville’s Wood Shop Director, David Amundson strives to create a culture of safety, creativity, and excellence in craft. He is former licensed architect with over 20 years experience in teaching the joys of woodworking, while also implementing best practices in shop safety.

Level: Any

Approx. Duration: 2 Hours

Instructor: Erica Feinberg

This Brand Ambassador Materials Workshop is a hands-on workshop for artists of all levels and experience from beginner to professional. Along with the instructor, this guided workshop is a learning experience where participants have the opportunity to experiment with and learn about many different materials. The Watermedia Workshop will focus on Holbein’s Watercolor, Gouache, Acrylic Gouache, and Watercolor Mediums, as well as Legion’s 100% cotton Stonehenge Aqua White and Black papers, Yupo White paper, and an assortment of General Pencil materials. 

The Forge is grateful for our partnership with Holbein, Legion Paper, and General Pencil, in which all materials and instruction are fully sponsored, and included as part of the class fee.

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the Instructor:

Erica Feinberg, is a community-taught artist whose creative journey began after completing a pharmacist residency in Nashville. Seeking a creative outlet, she discovered a passion for painting and has since focused on exploring the interplay between science and art. Her work primarily employs acrylic, gouache, and acrylic gouache mediums that allow her to capture the beauty and complexity of the natural world. She also loves exploring many different mediums to expand her creative expression.

Level: Beginner

Approx. Duration: 6 Total Hours, divided into 2 sessions. This class is 2 parts, each a 3-hour session on particular dates. You must attend all dates to complete your project, and you must attend the first day in order to proceed.

Class Enrollment Closure: 3 days prior to date of class. Any last minute enrollments must be approved prior to sign up.

Age Requirement: 16+ (Anyone under the age of 18 must be accompanied to class by a parent/legal guardian to sign a waiver on their behalf.)

Instructor: David Amundson

Create a custom picture frame from scratch! Over 2 sessions, learn to build a frame for your favorite Hatch Show poster print, or other similar sized artwork. Students can choose from a wide variety of frame profiles and color applications. You will fabricate, assemble, sand, stain, finish and install hardware to complete your very own original frame, built to professional standards!

Class Outline:

• Session 1: Introduction, basic construction, how to apply stain or finish. Homework is to shop for a glass insert piece and mat (optional) to bring to the next session.

• Session 2: Completing the finish to achieve a professional-look, installing the glass, inserting the artwork, adding hardware.

Most tools & materials are provided by The Forge. This class requires students to purchase some of their own materials, which will be outlined by the instructor.

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the instructor:

As The Forge Nashville’s Wood Shop Director, David Amundson strives to create a culture of safety, creativity, and excellence in craft. He is former licensed architect with over 20 years experience in teaching the joys of woodworking, while also implementing best practices in shop safety.

Level: Intermediate

Prerequisite: Intro to MIG Welding, or prior outside MIG welding experience. Please do not enroll if you do not meet these requirements.

Age Requirement: 16+ (Anyone under the age of 18 must be accompanied to class by a parent/legal guardian to sign a waiver on their behalf.)

Instructor: Adrian Mizell 

Intro to TIG Welding will be an intensive tool and process orientation class on the TIG welder. Students will learn how to safely weld mild steel stock with multiple joint styles.

Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided.

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

Level: Beginner

Approx. Duration: 3 hours

Age Requirement: 14+ (Anyone under the age of 16 must be accompanied by a parent/legal guardian who will remain present for the duration of the class. Under the age of 18 must be accompanied to class by a parent/legal guardian to sign a waiver on their behalf.)g

Instructor: Jared Moran

Begin your introduction into the art of wood turning with Jared Moran of Wildland Woodworks! We will cover the basics of the lathe, lathe tools and accessories. We will start with a discussion of various holding techniques and proper form for safety. Students will practice these new skills by turning a honey dipper on the lathe which they will take home after sanding and sealing.

The maximum number of students is 3, so that each student receives one-on-one instruction. Class tuition includes all materials.

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the Instructor:

Jared Moran of Wildland Woodworks is a self taught turner from Bowling Green, KY. He uses only local wood in his shop. His work is defined by a desire to highlight the natural colors and features of each wood species. 

Level: Beginner

Approx. Duration: 2 Hours

Minimum Age: 12 Years

Instructor: Stacy Wiatrak

Create a beautiful decorative 14” wreath from a variety of dried florals!

Instructor Stacy Wiatrak will guide you through this relaxing and fulfilling project, demonstrating how to plan and arrange florals of your choice into your own unique design. Finish with a long lasting “forever” wreath as elegant piece to adorn your home. It also makes a wonderful Mother’s Day gift, housewarming gift, or anytime gift.

*All tools and materials will be provided by The Forge.

All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

Stacy Wiatrak is a highly accomplished floral designer and instructor who carries multiple distinctions through her professional journey. As the founder of esteemed flower shop Laurel and Leaf, she has specialized in custom arrangements for her impressive client list. Stacy has received accolades for her work, including being listed in the top 20 florists in the South by Southern Living Magazine, named Voter’s Choice in Nashville House and Home Magazine for five consecutive years, and consistently placed in the top three florists on Yelp. Her instructor credentials include workshops for corporate groups, community groups, schools, and even private gatherings. She is now semi-retired and enjoying traveling with her husband.

Read more about Stacy’s accomplishments in Southern Living and House And Home Nashville.

Level: Beginner

Approx. Duration: 2.5 Hours

Age Requirement: 12+ (Anyone under the age of 18 must be accompanied by a parent/legal guardian who is also enrolled in the class.)

Instructor: Ashley Wooten

Join Ashley of Ashwood & Hawke for a hands-on class where you'll create your own live edge moss art! Students will learn the basics of design, layout, and assembly while customizing their own unique piece of dynamic art.

No prior experience is necessary—all tools and materials are provided, and you'll leave with a finished piece of art ready to hang.

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the Instructor:

Ashley is a self-taught wood artist and the creative force behind Ashwood & Hawke, a studio based in Spring Hill, Tennessee. Since crafting her first wood art piece in early 2021, she has transformed her passion into a thriving business, specializing in modern geometric designs and custom woodwork. Balancing her role as a single mother of two, Ashley finds empowerment and expression through her art, continually challenging herself to explore new designs and techniques. Her work not only adorns homes but also brings brands to life with bespoke wood logo signs. Ashley’s journey from novice to artisan underscores her belief in the transformative power of creativity.

Level: Beginner

Approx. Duration: 8 hours (with a lunch break included)

Age Requirement: 14+ (Anyone under the age of 16 must be accompanied by a parent/legal guardian who will remain present for the duration of the class. Under the age of 18 must be accompanied to class by a parent/legal guardian to sign a waiver on their behalf.)g

Instructor: Jared Moran

Begin your intensive introduction into the art of wood turning with Jared Moran of Wildland Woodworks! We will cover the basics of the lathe, lathe tools and accessories. We will start with a discussion of various holding techniques, how to prepare bowl blanks and a discussion on design. Students will continue mastering skills by turning bowls on the lathe, which they will take home after sanding and sealing them. The maximum number of students is three, so that each student receives one on one instruction, each on a lathe of their own.

Class tuition includes all materials.

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the Instructor:

Jared Moran of Wildland Woodworks is a self taught turner from Bowling Green, KY. He uses only local wood in his shop. His work is defined by a desire to highlight the natural colors and features of each wood species. 

Level: Beginner

Approx. Duration: 3 hours

Age Requirement: 14+ (Anyone under the age of 16 must be accompanied by a parent/legal guardian who will remain present for the duration of the class. Under the age of 18 must be accompanied to class by a parent/legal guardian to sign a waiver on their behalf.)

Instructor: Jared Moran

Begin your introduction into the art of wood turning with Jared Moran of Wildland Woodworks!

We will cover the basics of the lathe, lathe tools and accessories. We will start with a discussion of various holding techniques and proper form for safety. Students will practice these new skills by turning a French Rolling Pin on the lathe which they will take home after sanding and sealing.

The maximum number of students is three, so that each student receives one on one instruction on a dedicated lathe of their own.

Class tuition includes all materials.

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the Instructor:

Jared Moran of Wildland Woodworks is a self taught turner from Bowling Green, KY. He uses only local wood in his shop. His work is defined by a desire to highlight the natural colors and features of each wood species. 

Level: Beginner

Approx. Duration: 3 hours

Age Requirement: 14+ (Anyone under the age of 16 must be accompanied by a parent/legal guardian who will remain present for the duration of the class. Under the age of 18 must be accompanied to class by a parent/legal guardian to sign a waiver on their behalf.)g

Instructor: Jared Moran

Begin your introduction into the art of wood turning with Jared Moran of Wildland Woodworks!

We will cover the basics of the lathe, lathe tools and accessories. We will start with a discussion of various holding techniques and proper form for safety. Students will practice these new skills by turning a bud vase on the lathe which they will take home after sanding and sealing.

The maximum number of students is three, so that each student receives one on one instruction, each on their own dedicated lathe.

Class tuition includes all materials.

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the Instructor:

Jared Moran of Wildland Woodworks is a self taught turned from Bowling Green, KY. He uses only local wood in his shop. His work is defined by a desire to highlight the natural colors and features of each wood species. 

Level: Beginner

Approx. Duration: 8 hours (with a lunch break included)

Age Requirement: 14+ (Anyone under the age of 16 must be accompanied by a parent/legal guardian who will remain present for the duration of the class. Under the age of 18 must be accompanied to class by a parent/legal guardian to sign a waiver on their behalf.)g

Instructor: Jared Moran

Begin your intensive introduction into the art of wood turning with Jared Moran of Wildland Woodworks! We will cover the basics of the lathe, lathe tools and accessories. We will start with a discussion of various holding techniques, how to prepare bowl blanks and a discussion on design. Students will continue mastering skills by turning bowls on the lathe, which they will take home after sanding and sealing them. The maximum number of students is three, so that each student receives one on one instruction, each on a lathe of their own.

Class tuition includes all materials.

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the Instructor:

Jared Moran of Wildland Woodworks is a self taught turner from Bowling Green, KY. He uses only local wood in his shop. His work is defined by a desire to highlight the natural colors and features of each wood species. 

Level: Beginner

Approx. Duration: 5 Hours (w/ half hour lunch break included)

Age Requirement: 16+

Instructor: Jenny Cramer

Learn the incredible art of silversmithing, and take home your very own sterling jewelry!

In this fun, beginner friendly class, you will learn and practice the core skills of silversmithing. All the tools and materials you need will be provided in the class.

You will learn:

• Foundational skills and techniques of silversmithing

• How to make (and take home) a set of sterling silver stacking rings

• How to make (and take home) your very own ring with a bezel set stone

You will be introduced to important techniques and tools, including torches to heat the metal.

After class, you’ll go home with all of your new handmade sterling silver jewelry, a packet full of resources on suppliers, trouble shooting tips, and reference sheets for the skills you acquired in class, as well as access to Jenny’s online beginner’s silversmithing course so you can refer back to video recorded content of the steps we cover in class. 

Plan ahead for your class:

• Be sure and wear closed toed shoes, long pants and tie your long hair up.

• There will be a short break for lunch, which your instructor will give you a 30 minute notice for. Please bring something to eat that does not require heating, or plan to have your lunch delivered for the time advised by your instructor.

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the Instructor:

Jenny Cramer is a full-time silversmith, operating her jewelry business Sedona Rose Studio from her home in the hills outside of Nashville. You can check out her Instagram, as well. She has taught silversmithing to hundreds of students in-person and online, many of whom have gone on to create jewelry businesses of their own. She wants to share her love for this trade and the fulfillment it brings with as many people as possible. 

Level: Beginner

Approx. Duration: 6 Total Hours, divided into 2 sessions. This class is 2 parts, each a 3-hour session on particular dates. You must attend all dates to complete your project, and you must attend the first day in order to proceed.

Class Enrollment Closure: 3 days prior to date of class. Any last minute enrollments must be approved prior to sign up.

Age Requirement: 16+ (Anyone under the age of 18 must be accompanied to class by a parent/legal guardian to sign a waiver on their behalf.)

Instructor: David Amundson

Create a custom picture frame from scratch! Over 2 sessions, learn to build a frame for your favorite Hatch Show poster print, or other similar sized artwork. Students can choose from a wide variety of frame profiles and color applications. You will fabricate, assemble, sand, stain, finish and install hardware to complete your very own original frame, built to professional standards!

Class Outline:

• Session 1: Introduction, basic construction, how to apply stain or finish. Homework is to shop for a glass insert piece and mat (optional) to bring to the next session.

• Session 2: Completing the finish to achieve a professional-look, installing the glass, inserting the artwork, adding hardware.

Most tools & materials are provided by The Forge. This class requires students to purchase some of their own materials, which will be outlined by the instructor.

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the instructor:

As The Forge Nashville’s Wood Shop Director, David Amundson strives to create a culture of safety, creativity, and excellence in craft. He is former licensed architect with over 20 years experience in teaching the joys of woodworking, while also implementing best practices in shop safety.

Level: Beginner

Approx. Duration: 4 Hours

Age Requirement: 12+ (Anyone under the age of 18 must be accompanied by a parent/legal guardian who is also enrolled in the class.)

Instructor: Ashley Wooten

Join Ashley of Ashwood & Hawke for a hands-on woodworking class where you'll create your own geometric wood mosaic using a variety of hardwoods. Students will learn the basics of design, layout, and assembly while customizing their own unique pattern with geometric lines and shapes.

No prior experience is necessary—all tools and materials are provided, and you'll leave with a finished piece of art ready to hang.

Tools you will learn to use:

• Compound Miter Saw

• Table Saw

• Router Table

• Sander

• Nail Gun

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the Instructor:

Ashley is a self-taught wood artist and the creative force behind Ashwood & Hawke, a studio based in Spring Hill, Tennessee. Since crafting her first wood art piece in early 2021, she has transformed her passion into a thriving business, specializing in modern geometric designs and custom woodwork. Balancing her role as a single mother of two, Ashley finds empowerment and expression through her art, continually challenging herself to explore new designs and techniques. Her work not only adorns homes but also brings brands to life with bespoke wood logo signs. Ashley’s journey from novice to artisan underscores her belief in the transformative power of creativity.

Level: Beginner

Approx. Duration: 3 hours

Age Requirement: 14+ (Anyone under the age of 16 must be accompanied by a parent/legal guardian who will remain present for the duration of the class. Under the age of 18 must be accompanied to class by a parent/legal guardian to sign a waiver on their behalf.)g

Instructor: Jared Moran

Begin your introduction into the art of wood turning with Jared Moran of Wildland Woodworks!

We will cover the basics of the lathe, lathe tools and accessories. We will start with a discussion of various holding techniques and proper form for safety. Students will practice these new skills by turning a bud vase on the lathe which they will take home after sanding and sealing.

The maximum number of students is three, so that each student receives one on one instruction, each on their own dedicated lathe.

Class tuition includes all materials.

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the Instructor:

Jared Moran of Wildland Woodworks is a self taught turned from Bowling Green, KY. He uses only local wood in his shop. His work is defined by a desire to highlight the natural colors and features of each wood species. 

Level: Beginner

Approx. Duration: 9 Total Hours, divided into 3 sessions. This class is 3 parts, each a 3-hour session on particular dates. Youmust attend all dates to complete your project, and you must attend the first day in order to proceed.

Class Enrollment Closure: 3 days prior to date of class. Any last minute enrollments must be approved prior to sign up.

Age Requirement: 16+ (Anyone under the age of 15 must be accompanied by a parent/legal guardian who is also enrolled in the class. Under the age of 18 must be accompanied to class by a parent/legal guardian to sign a waiver on their behalf.)

Instructor: David Amundson

Learn a centuries-old heritage craft and a staple of decorative wood design! Parquetry is the craft of creating tessellating patterns using wood veneer, and translates into many areas of decorative woodworking including furniture, flooring, coasters, ornaments and more.

Across 3 sessions, expert woodworking instructor David Amundson will guide you through the tools and equipment, design and application techniques, sanding and finishing, as well as demonstrations and sources of inspiration.

You will have time to practice in class and even bring some work home to complete between sessions.

Class Outline:

• Session 1: Introduction, examples and inspiration, fundamental tools & techniques. Practice in class and take home to complete laying out the design.

• Session 2: Pressing designs onto a backer board, sanding and finishing demo. Return in a few days to pick up the project post-pressing and take home to work on the finish.

• Session 3: Cutting down projects to final size, last steps for finishing.

All tools & materials are provided by The Forge.

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the instructor:

As The Forge Nashville’s Wood Shop Director, David Amundson strives to create a culture of safety, creativity, and excellence in craft. He is former licensed architect with over 20 years experience in teaching the joys of woodworking, while also implementing best practices in shop safety.

Level: Beginner

Approx. Duration: 8 hours (with a lunch break included)

Age Requirement: 14+ (Anyone under the age of 16 must be accompanied by a parent/legal guardian who will remain present for the duration of the class. Under the age of 18 must be accompanied to class by a parent/legal guardian to sign a waiver on their behalf.)g

Instructor: Jared Moran

Begin your intensive introduction into the art of wood turning with Jared Moran of Wildland Woodworks! We will cover the basics of the lathe, lathe tools and accessories. We will start with a discussion of various holding techniques, how to prepare bowl blanks and a discussion on design. Students will continue mastering skills by turning bowls on the lathe, which they will take home after sanding and sealing them. The maximum number of students is three, so that each student receives one on one instruction, each on a lathe of their own.

Class tuition includes all materials.

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the Instructor:

Jared Moran of Wildland Woodworks is a self taught turner from Bowling Green, KY. He uses only local wood in his shop. His work is defined by a desire to highlight the natural colors and features of each wood species. 

Level: Beginner

Approx. Duration: 3 Hours

Class Enrollment Closure: 3 days prior to date of class. Any last minute enrollments must be approved prior to sign up.

Age Requirement: 16+ (Anyone under the age of 18 must be accompanied by a parent/legal guardian who is also enrolled in the class.)

Instructor: Martha Morales Purucker

Learn the basics of stained glass and make a beautiful decorative ornament! Receive expert guidance throughout the process as you apply the fundamentals of creating a piece of stained glass art, adding your choice of pressed flowers to result in your own unique design.

All materials for this class will be supplied to students by The Forge.

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the instructor:

Martha Morales Purucker is a fused glass artist with over a decade of experience transforming glass into art. Inspired by her Mexican roots and honed through years of learning from glass masters, she creates vibrant pieces that inspire joy and showcase the magic of glass. You can view her work at www.glassvilletn.com

Level: Advanced Master Class

Prerequisite: Before enrolling, you must have completed TWO other wood turning classes. Please do not enroll if you do not meet these requirements.

Approx. Duration: 8 Hours

Age Requirement: 14+ (Anyone under the age of 16 must be accompanied by a parent/legal guardian who will remain present for the duration of the class. Under the age of 18 must be accompanied to class by a parent/legal guardian to sign a waiver on their behalf.)

Instructor: Jared Moran

It’s time to master your wood turning skills and take your craft to the next level! In this master class, instructor Jared Moran will guide you through the art of turning to finish your very own small hollow vessel.

You will utilize previously acquired skills, plus learn higher level tool sharpening, advanced sanding techniques, and buffing techniques.

Approx. dimensions: 5” x 5” x 5”.

The maximum number of students is three, so that each student receives one-on-one instruction, each on a lathe of their own.

We will provide a light lunch. Please bring your beverages for the day. All tools and materials for this class will be supplied to students by The Forge.

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the instructor:

Jared Moran of Wildland Woodworks is a self taught turner from Bowling Green, KY. He uses only local wood in his shop. His work is defined by a desire to highlight the natural colors and features of each wood species. 

Level: Beginner

Approx. Duration: 9 Total Hours, divided into 3 sessions. This class is 3 parts, each a 3-hour session on particular dates. Youmust attend all dates to complete your project, and you must attend the first day in order to proceed.

Class Enrollment Closure: 3 days prior to date of class. Any last minute enrollments must be approved prior to sign up.

Age Requirement: 16+ (Anyone under the age of 15 must be accompanied by a parent/legal guardian who is also enrolled in the class. Under the age of 18 must be accompanied to class by a parent/legal guardian to sign a waiver on their behalf.)

Instructor: David Amundson

Learn a centuries-old heritage craft and a staple of decorative wood design! Parquetry is the craft of creating tessellating patterns using wood veneer, and translates into many areas of decorative woodworking including furniture, flooring, coasters, ornaments and more.

Across 3 sessions, expert woodworking instructor David Amundson will guide you through the tools and equipment, design and application techniques, sanding and finishing, as well as demonstrations and sources of inspiration.

You will have time to practice in class and even bring some work home to complete between sessions.

Class Outline:

• Session 1: Introduction, examples and inspiration, fundamental tools & techniques. Practice in class and take home to complete laying out the design.

• Session 2: Pressing designs onto a backer board, sanding and finishing demo. Return in a few days to pick up the project post-pressing and take home to work on the finish.

• Session 3: Cutting down projects to final size, last steps for finishing.

All tools & materials are provided by The Forge.

All class enrollments are subject to a no-refund, no-transfer policy. Instructors have the right to refuse any enrollee who does not meet the age and/or prerequisite requirements without issuing any refund.

By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq

About the instructor:

As The Forge Nashville’s Wood Shop Director, David Amundson strives to create a culture of safety, creativity, and excellence in craft. He is former licensed architect with over 20 years experience in teaching the joys of woodworking, while also implementing best practices in shop safety.