Intermediate Level

Prerequisite: Intro to Table Saw or suitable level of hands-on experience on the table saw.

This class will pick up where Intro to Table Saw left off, jumping immediately into machining processes that are beyond the basic ripping and crosscutting functions. The class will have discussions about, demonstrations of, and hands-on training on: crosscut sleds (including discussion on how to build your own sled), taper cuts, using the table saw as a substitute jointer, vertical cuts, working small safely, and cove cuts.

** Classes are transferable up to 48 hours before class, but not refundable.

Intro to MIG Welding - 4 students private class

** Classes are transferable up to 48 hours before class, but not refundable.

Beginner Level

This class will explore a couple different approaches to building an absolute staple for painters: the canvas stretcher frame. Even though they cost a small fortune to buy in an art supply store, they are actually fairly easy and inexpensive to build. The main variable in their construction is what kind of tools / work space is available for the artist to use?

This class will present approaches for how to build stretcher frames for folks who have little work space and few tools all the way up through folks who have generous work spaces and a decent array of woodworking tools available to them. No matter where you fall on this spectrum, there will be a technique/process shown that will fit your profile.

As a part of this class, students will produce (and take home with them) at least one canvas stretcher frame. Students will also leave with an understanding of both the equipment and materials required for producing stretcher frames on their own in the future.

** Classes are transferable up to 48 hours before class, but not refundable.

Begin your introduction into the art of wood turning with Jared Moran of Wildland Woodworks! We will cover the basics of the lathe, lathe tools and accessories. We will start with a discussion of various holding techniques and proper form for safety. Students will practice these new skills by turning a honey dipper on the lathe which they will take home after sanding and sealing. The maximum number of students is 4, so that each student receives one on one instruction.

Jared Moran of Wildland Woodworks is a self taught turned from Bowling Green, KY. He uses only local wood in his shop. His work is defined by a desire to highlight the natural colors and features of each wood species. 

* Class tuition includes all materials.

** Classes are transferable up to 48 hours before class, but not refundable.

This is a two part class. Please register for both parts.

*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***

In this metalworking class, students will learn to hand fabricate a table lamp from steel sheet metal and found objects. Learn how to use 6 different tools in The Forge Nashville Metal Shop, including the sheer, brake, iron worker, and horizontal and vertical bandsaws. We will experiment with different shade materials and learn how to safely wire basic lighting circuits. All lamps will be wired and tested to UL specifications for portable luminaries. Class size is limited to 3 students.

This class is taught by Larkin Rhinehardt, our Director of Metal Shop. Larkin’s specialty is in custom lighting and luminous sculptural installations.

* All materials for this class are included in the tuition.

** Classes are transferable up to 48 hours before class, but not refundable.

Begin your introduction into the art of wood turning with Jared Moran of Wildland Woodworks! We will cover the basics of the lathe, lathe tools and accessories. We will start with a discussion of various holding techniques and proper form for safety. Students will practice these new skills by turning a French Rolling Pin on the lathe which they will take home after sanding and sealing. The maximum number of students is 2, so that each student receives one on one instruction.

Jared Moran of Wildland Woodworks is a self taught turned from Bowling Green, KY. He uses only local wood in his shop. His work is defined by a desire to highlight the natural colors and features of each wood species. 

* Class tuition includes all materials.

** Classes are transferable up to 48 hours before class, but not refundable.

Begin your intensive introduction into the art of wood turning with Jared Moran of Wildland Woodworks! We will cover the basics of the lathe, lathe tools and accessories. We will start with a discussion of various holding techniques, how to prepare bowl blanks and a discussion on design. Students will continue mastering skills by turning bowls on the lathe, which they will take home after sanding and sealing them. The maximum number of students is 2, so that each student receives one on one instruction. We will provide a light lunch. Please bring your beverages for the day.

Jared Moran of Wildland Woodworks is a self taught turned from Bowling Green, KY. He uses only local wood in his shop. His work is defined by a desire to highlight the natural colors and features of each wood species. 

* Class tuition includes all materials.

** Classes are transferable up to 48 hours before class, but not refundable.

Intro to MIG Welding - 4 students private class

** Classes are transferable up to 48 hours before class, but not refundable.

This is a two-session class - you must complete Part 1 and Part 2 to complete your own cutting board.

Please purchase Part 1 ($190) and register for Part 2 (free).

End-grain cutting boards and chopping blocks are preferred by professional chefs and butchers worldwide; they last longer and keep knives sharper. In this two-day class, participants will learn experiment with new skills and take home an original work of art.

This is an entry-level class in which students will design and assemble their cutting board to glue and clamp. The second class will involve sanding and sealing with a food-grade finish. There are no moving blades in this class instruction.

This class is highly recommended for anyone who needs an unusual wedding or birthday gift.

In Session 1 participants will:

· Learn to distinguish end grain from edge grain;

· Discover their inner designer (do you prefer random or ordered patterns??)

· Assemble their creation and use clamps to glue them together.

* All materials are provided.

** Classes are transferable, but not refundable. Only transferable up to 48 hours before class. **

This is a 3 part class. You must purchase Part 1 and register for
Parts 2 and 3 (free).

To finish your box, you should attend all class times.

During this introductory woodworking class, each student will produce a custom keepsake box with a lid, measuring roughly 9"L x 6"W x 4"H. Each project produced will be unique to each student.  Basic machining, construction, wood joinery, and wood finishing techniques will all be taught as a part of this class. Wood type/color, and box dimensions can be personalized. Students will learn to cut, assemble, and glue a mitered box with splines on each corner. After glued components have cured, students will be taught how to construct the lid of the box, and given the option to customize with a handle or lift. In the final session, students will sand their boxes, and return home with a small wood finishing kit as well as instruction on how to
complete the finishing process.

Class will be taught by local Nashville Woodworker Cam Banks of CamCrafted Wooden Box Studio, recently exhibiting at the Crafty Bastards craft fair as a featured artist.

* All materials are provided

** Classes are transferable up to 48 hours before class, but not refundable.

Join us to learn how to crochet by creating a dishcloth.

Beginner level.

No experience needed.

Class fee includes: (all materials)

- Dishcloths pattern book by Candi Jensen with 9 different patterns

- Crochet hook

- Cotton yarn

- Yarn needle

- Stitch guide

- Scissors

- Ruler

- Instruction

We will discuss the basics of hooks, yarn, skill levels, abbreviations for basic stitches and how to hold and tension the yarn. We will work some practice stitches then get a good start or complete a dishcloth!

Kim Wienzierl is the founder of Creative Nashville which offers classes in fiber arts and stained glass. Her mission is to keep these arts alive so others can enjoy them as much as she has over the decades. She is an Information Technology and Data professional by day but enjoys getting beginners started with skills in Stained Glass and Fiber Arts.

** Classes are transferable up to 48 hours before class, but not refundable.

This is a 3 part class. You must purchase Part 1 and register for
Parts 2 and 3 (free).

To finish your box, you should attend all class times.

During this introductory woodworking class, each student will produce a custom keepsake box with a lid, measuring roughly 9"L x 6"W x 4"H. Each project produced will be unique to each student.  Basic machining, construction, wood joinery, and wood finishing techniques will all be taught as a part of this class. Wood type/color, and box dimensions can be personalized. Students will learn to cut, assemble, and glue a mitered box with splines on each corner. After glued components have cured, students will be taught how to construct the lid of the box, and given the option to customize with a handle or lift. In the final session, students will sand their boxes, and return home with a small wood finishing kit as well as instruction on how to
complete the finishing process.

Class will be taught by local Nashville Woodworker Cam Banks of CamCrafted Wooden Box Studio, recently exhibiting at the Crafty Bastards craft fair as a featured artist.

* All materials are provided

** Classes are transferable up to 48 hours before class, but not refundable.

*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***

Intro to TIG Welding will be an intensive tool and process orientation class on the TIG welder. Students will learn how to safely weld mild steel stock with multiple joint styles.

Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. 

** Classes are transferable up to 48 hours before class, but not refundable.

Begin your introduction into the art of wood turning with Jared Moran of Wildland Woodworks! We will cover the basics of the lathe, lathe tools and accessories. We will start with a discussion of various holding techniques and proper form for safety. Students will practice these new skills by turning a honey dipper on the lathe which they will take home after sanding and sealing. The maximum number of students is 4, so that each student receives one on one instruction.

Jared Moran of Wildland Woodworks is a self taught turned from Bowling Green, KY. He uses only local wood in his shop. His work is defined by a desire to highlight the natural colors and features of each wood species. 

* Class tuition includes all materials.

** Classes are transferable up to 48 hours before class, but not refundable.

This is a two part class. Please register for both parts.

*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***

In this metalworking class, students will learn to hand fabricate a table lamp from steel sheet metal and found objects. Learn how to use 6 different tools in The Forge Nashville Metal Shop, including the sheer, brake, iron worker, and horizontal and vertical bandsaws. We will experiment with different shade materials and learn how to safely wire basic lighting circuits. All lamps will be wired and tested to UL specifications for portable luminaries. Class size is limited to 3 students.

This class is taught by Larkin Rhinehardt, our Director of Metal Shop. Larkin’s specialty is in custom lighting and luminous sculptural installations.

* All materials for this class are included in the tuition.

** Classes are transferable up to 48 hours before class, but not refundable.

Begin your introduction into the art of wood turning with Jared Moran of Wildland Woodworks! We will cover the basics of the lathe, lathe tools and accessories. We will start with a discussion of various holding techniques and proper form for safety. Students will practice these new skills by turning a French Rolling Pin on the lathe which they will take home after sanding and sealing. The maximum number of students is 2, so that each student receives one on one instruction.

Jared Moran of Wildland Woodworks is a self taught turned from Bowling Green, KY. He uses only local wood in his shop. His work is defined by a desire to highlight the natural colors and features of each wood species. 

* Class tuition includes all materials.

** Classes are transferable up to 48 hours before class, but not refundable.

Dive into the vibrant world of fused glass and craft your own unique fused glass sculptural bowl! This hands-on workshop welcomes participants of all skill levels, from beginners to experienced glass artists. Through guided instruction and creative exploration, you'll learn essential techniques to design and create a stunning fused glass bowl that sparkles and shines.

Fused glass is a beautiful and versatile art form that involves layering and melting glass pieces in a kiln to create intricate designs and vibrant colors. By carefully controlling temperature and time, artists can fuse glass into a variety of shapes and textures, resulting in stunning decorative and functional pieces. Whether you are a beginner or an experienced artist, fused glass offers endless opportunities for creativity and expression.

In this workshop, participants will:

• Learn about the basics of fused glass art.

• Have hands-on experience with cutting and arranging fusible glass.

• Design and assemble a fused glass sculptural bowl.

Join us for a fun and engaging workshop and create your own dazzling fused glass bowl that will add a touch of art and creativity to your space!

I'm Martha Morales Purucker, a fused glass artist with over a decade of experience transforming glass into art. Inspired by my Mexican roots and honed through years of learning from glass masters, I've created a vibrant studio space where creativity flourishes. Let's explore the magic of glass together!

www.glassvilletn.com

Instagram @glassvilletn 

Facebook @glassvilletn 

email @glassvilletn@gmail.com

* All materials are provided.

Classes are transferable, but not refundable. Only transferable up to 48 hours before class.

Begin your intensive introduction into the art of wood turning with Jared Moran of Wildland Woodworks! We will cover the basics of the lathe, lathe tools and accessories. We will start with a discussion of various holding techniques, how to prepare bowl blanks and a discussion on design. Students will continue mastering skills by turning bowls on the lathe, which they will take home after sanding and sealing them. The maximum number of students is 2, so that each student receives one on one instruction. We will provide a light lunch. Please bring your beverages for the day.

Jared Moran of Wildland Woodworks is a self taught turned from Bowling Green, KY. He uses only local wood in his shop. His work is defined by a desire to highlight the natural colors and features of each wood species. 

* Class tuition includes all materials.

** Classes are transferable up to 48 hours before class, but not refundable.

Join us to learn how to sew.

Beginner level. No experience needed, but welcomed.

Class fee includes:

- Pattern

- Fabric

- Thread

- Use of sewing machine

- Use of sewing notions

- Instruction

We will discuss the basics of sewing including how to read a pattern, how to select and cut out fabric, parts of the fabric, sewing machine safety and operation, how to finish fabric edges and how to sew. Worried you won't finish by the end of the event? Don't be! You can take you project home to complete it on your sewing machine with unlimited phone assistance, you can purchase the class sewing machine and notions to take home to finish or you can leave it to be finished by our talented seamstress. :D

Kim Wienzierl is the founder of Creative Nashville which offers classes in fiber arts and stained glass. Her mission is to keep these arts alive so others can enjoy them as much as she has over the decades. She is an Information Technology and Data professional by day but enjoys getting beginners started with skills in Stained Glass and Fiber Arts.

** Classes are transferable up to 48 hours before class, but not refundable.

This is a 3 part class. You must purchase Part 1 and register for
Parts 2 and 3 (free).

To finish your box, you should attend all class times.

During this introductory woodworking class, each student will produce a custom keepsake box with a lid, measuring roughly 9"L x 6"W x 4"H. Each project produced will be unique to each student.  Basic machining, construction, wood joinery, and wood finishing techniques will all be taught as a part of this class. Wood type/color, and box dimensions can be personalized. Students will learn to cut, assemble, and glue a mitered box with splines on each corner. After glued components have cured, students will be taught how to construct the lid of the box, and given the option to customize with a handle or lift. In the final session, students will sand their boxes, and return home with a small wood finishing kit as well as instruction on how to
complete the finishing process.

Class will be taught by local Nashville Woodworker Cam Banks of CamCrafted Wooden Box Studio, recently exhibiting at the Crafty Bastards craft fair as a featured artist.

* All materials are provided

** Classes are transferable up to 48 hours before class, but not refundable.

Begin your intensive introduction into the art of wood turning with Jared Moran of Wildland Woodworks! We will cover the basics of the lathe, lathe tools and accessories. We will start with a discussion of various holding techniques, how to prepare bowl blanks and a discussion on design. Students will continue mastering skills by turning bowls on the lathe, which they will take home after sanding and sealing them. The maximum number of students is 2, so that each student receives one on one instruction. We will provide a light lunch. Please bring your beverages for the day.

Jared Moran of Wildland Woodworks is a self taught turned from Bowling Green, KY. He uses only local wood in his shop. His work is defined by a desire to highlight the natural colors and features of each wood species. 

* Class tuition includes all materials.

** Classes are transferable up to 48 hours before class, but not refundable.

*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***

In this class, students will learn how to fabricate an end table base out of mild steel from start to finish!

From learning how to read a drawing, to measuring, cutting, drilling, tapping, layout, clamping, welding, and blending - students will experience robust use of the metal shop with the following tools:

• measuring tools

• horizontal band saw

• drill press

• taps

• clamps

• MIG welder

• angle grinder and cut off wheel

• pneumatic tools

After these two class sessions, students will have a 24” x 18” base to an end table. Come take a class in our wood shop to learn how to make a top for it!

All materials, PPE will be provided, as well as some snacks and drinks!. Four students max. 

** Classes are transferable up to 48 hours before class, but not refundable.

*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***

In this class, students will learn how to fabricate an end table base out of mild steel from start to finish!

From learning how to read a drawing, to measuring, cutting, drilling, tapping, layout, clamping, welding, and blending - students will experience robust use of the metal shop with the following tools:

• measuring tools

• horizontal band saw

• drill press

• taps

• clamps

• MIG welder

• angle grinder and cut off wheel

• pneumatic tools

After these two class sessions, students will have a 24” x 18” base to an end table. Come take a class in our wood shop to learn how to make a top for it!

All materials, PPE will be provided, as well as some snacks and drinks!. Four students max. 

** Classes are transferable up to 48 hours before class, but not refundable.

Come and learn how to create with leaded stained glass.

Beginner level. No experience needed.

Class fee includes:

- Stained Glass Making Basics book by Lynn Haunstein

- Stained glass for project

- Copper foil for project

- Solder for project

- Lead came for project

- Loops & chain for project

- Nitrile gloves

- Goggles

- Use of tools & materials - grinder, pliers, soldering iron & stand, pattern scissors, burnishing fid, glass cutter, markers, rubber cement, right angle lead board, pins & nails, knife, lead vise, flux, cleaner, patina & gloss

- Pattern

- Instruction

We will discuss the basics of making stained glass, types of glass, types of lead, cutting glass, soldering glass, applying patina, and safety. We will finish a stained glass panel. You will have the option to buy the toolbox of tools and additional materials you use at the end of class if you are interested.

Kim Wienzierl is the founder of Creative Nashville which offers classes in fiber arts and stained glass. Her mission is to keep these arts alive so others can enjoy them as much as she has over the decades. She is an Information Technology and Data professional by day but enjoys getting beginners started with skills in Stained Glass and Fiber Arts.

** Classes are transferable up to 48 hours before class, but not refundable.

This is a two-session class - you must complete Part 1 and Part 2 to complete your own cutting board.

Please purchase Part 1 ($190) and register for Part 2 (free).

End-grain cutting boards and chopping blocks are preferred by professional chefs and butchers worldwide; they last longer and keep knives sharper. In this two-day class, participants will learn experiment with new skills and take home an original work of art.

This is an entry-level class in which students will design and assemble their cutting board to glue and clamp. The second class will involve sanding and sealing with a food-grade finish. There are no moving blades in this class instruction.

This class is highly recommended for anyone who needs an unusual wedding or birthday gift.

In Session 1 participants will:

· Learn to distinguish end grain from edge grain;

· Discover their inner designer (do you prefer random or ordered patterns??)

· Assemble their creation and use clamps to glue them together.

* All materials are provided.

** Classes are transferable, but not refundable. Only transferable up to 48 hours before class. **

This is a two-session class - you must complete Part 1 and Part 2 to complete your own frame.

Please purchase Part 1 ($125) and register for Part 2 (free).

It seems like one thing that many folks living in Nashville have in common is that they have been to see a band play at the Ryman or other local music venue.  Of those folks that go to shows here in Nashville, it seems that another thing they have in common is a small collection of posters from said shows.  Many posters are bought with the intention of framing them and hanging them up, but many of those intentions are never realized.

Now is your chance to make amends!

Students in The Great Frame-Up will each build a frame for a concert poster (or other similarly-sized piece of artwork) of their choosing.  Participants will learn to create a custom frame from scratch. There will be a wide variety of frame profiles that they can create, and the choice of how to apply color (or not) to the frame will be nearly unlimited.  Students will receive instruction on fabrication, assembly, sanding, staining / finishing, and hardware installation.  The end product will be an entirely original frame, built to professional standards.

The first week will cover the basic construction of the frame and instruction on how to apply stain and/or finish to the frame.  Depending on progress made during the first session, an additional brief visit to The Forge may be required to be fully prepped for the second class session.  Students will also need to make a quick visit to a local hardware store or glass shop to purchase a piece of glass to install in the frame during the second class session.  The second class session will cover 'finishing the finish' to achieve a professional-looking finish on the frame, then installation of the glass, poster, and hardware.

All materials are provided, except for glass and mat, which are optional.

** Classes are transferable up to 48 hours before class, but not refundable.

Begin your intensive introduction into the art of wood turning with Jared Moran of Wildland Woodworks! We will cover the basics of the lathe, lathe tools and accessories. We will start with a discussion of various holding techniques, how to prepare bowl blanks and a discussion on design. Students will continue mastering skills by turning bowls on the lathe, which they will take home after sanding and sealing them. The maximum number of students is 2, so that each student receives one on one instruction. We will provide a light lunch. Please bring your beverages for the day.

Jared Moran of Wildland Woodworks is a self taught turned from Bowling Green, KY. He uses only local wood in his shop. His work is defined by a desire to highlight the natural colors and features of each wood species. 

* Class tuition includes all materials.

** Classes are transferable up to 48 hours before class, but not refundable.

Come and learn how to felt.

Beginner level. No experience needed.

Class fee includes:

- Felting instruction leaflet & patterns

- Wool roving

- Felting needles

- Glove tips

- Foam block

- Pattern

- Yarn

- Scissors

- Instruction

We will discuss the basics of felting, wool roving, needles and safety. We will complete a project and you will leave an accomplished beginner!

Kim Wienzierl is the founder of Creative Nashville which offers classes in fiber arts and stained glass. Her mission is to keep these arts alive so others can enjoy them as much as she has over the decades. She is an Information Technology and Data professional by day but enjoys getting beginners started with skills in Stained Glass and Fiber Arts.

** Classes are transferable up to 48 hours before class, but not refundable.

Dive into the vibrant world of fused glass and craft your own unique fused glass sculptural bowl! This hands-on workshop welcomes participants of all skill levels, from beginners to experienced glass artists. Through guided instruction and creative exploration, you'll learn essential techniques to design and create a stunning fused glass bowl that sparkles and shines.

Fused glass is a beautiful and versatile art form that involves layering and melting glass pieces in a kiln to create intricate designs and vibrant colors. By carefully controlling temperature and time, artists can fuse glass into a variety of shapes and textures, resulting in stunning decorative and functional pieces. Whether you are a beginner or an experienced artist, fused glass offers endless opportunities for creativity and expression.

In this workshop, participants will:

• Learn about the basics of fused glass art.

• Have hands-on experience with cutting and arranging fusible glass.

• Design and assemble a fused glass sculptural bowl.

Join us for a fun and engaging workshop and create your own dazzling fused glass bowl that will add a touch of art and creativity to your space!

I'm Martha Morales Purucker, a fused glass artist with over a decade of experience transforming glass into art. Inspired by my Mexican roots and honed through years of learning from glass masters, I've created a vibrant studio space where creativity flourishes. Let's explore the magic of glass together!

www.glassvilletn.com

Instagram @glassvilletn 

Facebook @glassvilletn 

email @glassvilletn@gmail.com

* All materials are provided.

Classes are transferable, but not refundable. Only transferable up to 48 hours before class.

This is a two-session class - you must complete Part 1 and Part 2 to complete your own frame.

Please purchase Part 1 ($125) and register for Part 2 (free).

It seems like one thing that many folks living in Nashville have in common is that they have been to see a band play at the Ryman or other local music venue.  Of those folks that go to shows here in Nashville, it seems that another thing they have in common is a small collection of posters from said shows.  Many posters are bought with the intention of framing them and hanging them up, but many of those intentions are never realized.

Now is your chance to make amends!

Students in The Great Frame-Up will each build a frame for a concert poster (or other similarly-sized piece of artwork) of their choosing.  Participants will learn to create a custom frame from scratch. There will be a wide variety of frame profiles that they can create, and the choice of how to apply color (or not) to the frame will be nearly unlimited.  Students will receive instruction on fabrication, assembly, sanding, staining / finishing, and hardware installation.  The end product will be an entirely original frame, built to professional standards.

The first week will cover the basic construction of the frame and instruction on how to apply stain and/or finish to the frame.  Depending on progress made during the first session, an additional brief visit to The Forge may be required to be fully prepped for the second class session.  Students will also need to make a quick visit to a local hardware store or glass shop to purchase a piece of glass to install in the frame during the second class session.  The second class session will cover 'finishing the finish' to achieve a professional-looking finish on the frame, then installation of the glass, poster, and hardware.

All materials are provided, except for glass and mat, which are optional.

** Classes are transferable up to 48 hours before class, but not refundable.

Join us to learn how to machine quilt by creating a quilted hot pad.

Beginner level. No experience needed.

Class fee includes: -

Teach Yourself to Machine Quilt book by Leisure Arts

- Hot pad pattern

- Fabric

- Batting

- Thread

- Use of sewing machine

- Use of notions

- Instruction

We will discuss the basics of quilting including how to sew, how to select and rotary cut fabric, parts of the fabric, sewing machine safety and operation, how to quilt with the sewing machine, how to hand sew a quilt binding. We will work some practice stitches first. Worried you won't finish by the end of the event? Don't be! You can take your project home to complete it on your sewing machine with unlimited phone assistance, you can purchase the class sewing machine and notions to take home to finish or you can leave it to be finished by our talented quilter. :D

Kim Wienzierl is the founder of Creative Nashville which offers classes in fiber arts and stained glass. Her mission is to keep these arts alive so others can enjoy them as much as she has over the decades. She is an Information Technology and Data professional by day but enjoys getting beginners started with skills in Stained Glass and Fiber Arts.

** Classes are transferable up to 48 hours before class, but not refundable.

Begin your introduction into the art of wood turning with Jared Moran of Wildland Woodworks! We will cover the basics of the lathe, lathe tools and accessories. We will start with a discussion of various holding techniques and proper form for safety. Students will practice these new skills by turning a honey dipper on the lathe which they will take home after sanding and sealing. The maximum number of students is 4, so that each student receives one on one instruction.

Jared Moran of Wildland Woodworks is a self taught turned from Bowling Green, KY. He uses only local wood in his shop. His work is defined by a desire to highlight the natural colors and features of each wood species. 

* Class tuition includes all materials.

** Classes are transferable up to 48 hours before class, but not refundable.

Begin your introduction into the art of wood turning with Jared Moran of Wildland Woodworks! We will cover the basics of the lathe, lathe tools and accessories. We will start with a discussion of various holding techniques and proper form for safety. Students will practice these new skills by turning a bud vase on the lathe which they will take home after sanding and sealing. The maximum number of students is 4, so that each student receives one on one instruction.

Jared Moran of Wildland Woodworks is a self taught turned from Bowling Green, KY. He uses only local wood in his shop. His work is defined by a desire to highlight the natural colors and features of each wood species. 

* Class tuition includes all materials.

** Classes are transferable up to 48 hours before class, but not refundable.

Begin your intensive introduction into the art of wood turning with Jared Moran of Wildland Woodworks! We will cover the basics of the lathe, lathe tools and accessories. We will start with a discussion of various holding techniques, how to prepare bowl blanks and a discussion on design. Students will continue mastering skills by turning bowls on the lathe, which they will take home after sanding and sealing them. The maximum number of students is 2, so that each student receives one on one instruction. We will provide a light lunch. Please bring your beverages for the day.

Jared Moran of Wildland Woodworks is a self taught turned from Bowling Green, KY. He uses only local wood in his shop. His work is defined by a desire to highlight the natural colors and features of each wood species. 

* Class tuition includes all materials.

** Classes are transferable up to 48 hours before class, but not refundable.

This is a two-session class - you must complete Part 1 and Part 2 to complete your own cutting board.

Please purchase Part 1 ($190) and register for Part 2 (free).

End-grain cutting boards and chopping blocks are preferred by professional chefs and butchers worldwide; they last longer and keep knives sharper. In this two-day class, participants will learn experiment with new skills and take home an original work of art.

This is an entry-level class in which students will design and assemble their cutting board to glue and clamp. The second class will involve sanding and sealing with a food-grade finish. There are no moving blades in this class instruction.

This class is highly recommended for anyone who needs an unusual wedding or birthday gift.

In Session 1 participants will:

· Learn to distinguish end grain from edge grain;

· Discover their inner designer (do you prefer random or ordered patterns??)

· Assemble their creation and use clamps to glue them together.

* All materials are provided.

** Classes are transferable, but not refundable. Only transferable up to 48 hours before class. **

Prepping Rough Sawn Lumber

Beginner Level

This class will teach the process for preparing rough sawn stock for use in woodworking projects. Across the evening, each student will be given an instruction to and hands-on use of the jointer, planer, and table saw. From this experience, students will learn how to produce a piece of S4S lumber from rough sawn stock. If time allows, there will be additional discussion on alternative ways to prep S4S lumber from rough sawn stock, as not everybody has the space needed for the machines traditionally used in this process. Additionally, if time allows, students will be able to run a couple pieces of their own stock through the machines in a brief session that will be open to those who wish to participate after the class formally concludes at 9:30pm.

** Classes are transferable up to 48 hours before class, but not refundable.

*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***

Intro to TIG Welding will be an intensive tool and process orientation class on the TIG welder. Students will learn how to safely weld mild steel stock with multiple joint styles.

Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. 

** Classes are transferable up to 48 hours before class, but not refundable.

Begin your introduction into the art of wood turning with Jared Moran of Wildland Woodworks! We will cover the basics of the lathe, lathe tools and accessories. We will start with a discussion of various holding techniques and proper form for safety. Students will practice these new skills by turning a honey dipper on the lathe which they will take home after sanding and sealing. The maximum number of students is 4, so that each student receives one on one instruction.

Jared Moran of Wildland Woodworks is a self taught turned from Bowling Green, KY. He uses only local wood in his shop. His work is defined by a desire to highlight the natural colors and features of each wood species. 

* Class tuition includes all materials.

** Classes are transferable up to 48 hours before class, but not refundable.

Begin your introduction into the art of wood turning with Jared Moran of Wildland Woodworks! We will cover the basics of the lathe, lathe tools and accessories. We will start with a discussion of various holding techniques and proper form for safety. Students will practice these new skills by turning a bud vase on the lathe which they will take home after sanding and sealing. The maximum number of students is 4, so that each student receives one on one instruction.

Jared Moran of Wildland Woodworks is a self taught turned from Bowling Green, KY. He uses only local wood in his shop. His work is defined by a desire to highlight the natural colors and features of each wood species. 

* Class tuition includes all materials.

** Classes are transferable up to 48 hours before class, but not refundable.

Begin your intensive introduction into the art of wood turning with Jared Moran of Wildland Woodworks! We will cover the basics of the lathe, lathe tools and accessories. We will start with a discussion of various holding techniques, how to prepare bowl blanks and a discussion on design. Students will continue mastering skills by turning bowls on the lathe, which they will take home after sanding and sealing them. The maximum number of students is 2, so that each student receives one on one instruction. We will provide a light lunch. Please bring your beverages for the day.

Jared Moran of Wildland Woodworks is a self taught turned from Bowling Green, KY. He uses only local wood in his shop. His work is defined by a desire to highlight the natural colors and features of each wood species. 

* Class tuition includes all materials.

** Classes are transferable up to 48 hours before class, but not refundable.

Dive into the vibrant world of fused glass and craft your own unique fused glass wind chime! This hands-on workshop welcomes participants of all skill levels, from beginners to experienced glass artists. Through guided instruction and creative exploration, you'll learn essential techniques to design and create a stunning fused glass vase that sparkles and shines.

Fused glass is a beautiful and versatile art form that involves layering and melting glass pieces in a kiln to create intricate designs and vibrant colors. By carefully controlling temperature and time, artists can fuse glass into a variety of shapes and textures, resulting in stunning decorative and functional pieces. Whether you are a beginner or an experienced artist, fused glass offers endless opportunities for creativity and expression.

In this workshop, participants will:

• Learn about the basics of fused glass art.

• Have hands-on experience with cutting and arranging fusible glass.

• Design and assemble a fused glass wind chime.

Join us for a fun and engaging workshop and create your own dazzling fused glass wind chime that will add a touch of art and creativity to your space!

I'm Martha Morales Purucker, a fused glass artist with over a decade of experience transforming glass into art. Inspired by my Mexican roots and honed through years of learning from glass masters, I've created a vibrant studio space where creativity flourishes. Let's explore the magic of glass together!

www.glassvilletn.com

Instagram @glassvilletn 

Facebook @glassvilletn 

email @glassvilletn@gmail.com

* All materials are provided.

Classes are transferable, but not refundable. Only transferable up to 48 hours before class.

Join us to learn how to sew.

Beginner level. No experience needed, but welcomed.

Class fee includes:

- Pattern

- Fabric

- Thread

- Use of sewing machine

- Use of sewing notions

- Instruction

We will discuss the basics of sewing including how to read a pattern, how to select and cut out fabric, parts of the fabric, sewing machine safety and operation, how to finish fabric edges and how to sew. Worried you won't finish by the end of the event? Don't be! You can take you project home to complete it on your sewing machine with unlimited phone assistance, you can purchase the class sewing machine and notions to take home to finish or you can leave it to be finished by our talented seamstress. :D

Kim Wienzierl is the founder of Creative Nashville which offers classes in fiber arts and stained glass. Her mission is to keep these arts alive so others can enjoy them as much as she has over the decades. She is an Information Technology and Data professional by day but enjoys getting beginners started with skills in Stained Glass and Fiber Arts.

** Classes are transferable up to 48 hours before class, but not refundable.

*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***

In this class, students will learn how to fabricate an end table base out of mild steel from start to finish!

From learning how to read a drawing, to measuring, cutting, drilling, tapping, layout, clamping, welding, and blending - students will experience robust use of the metal shop with the following tools:

• measuring tools

• horizontal band saw

• drill press

• taps

• clamps

• MIG welder

• angle grinder and cut off wheel

• pneumatic tools

After these two class sessions, students will have a 24” x 18” base to an end table. Come take a class in our wood shop to learn how to make a top for it!

All materials, PPE will be provided, as well as some snacks and drinks!. Four students max. 

** Classes are transferable up to 48 hours before class, but not refundable.

This is a two-session class - you must complete Part 1 and Part 2 to complete your own cutting board.

Please purchase Part 1 ($190) and register for Part 2 (free).

End-grain cutting boards and chopping blocks are preferred by professional chefs and butchers worldwide; they last longer and keep knives sharper. In this two-day class, participants will learn experiment with new skills and take home an original work of art.

This is an entry-level class in which students will design and assemble their cutting board to glue and clamp. The second class will involve sanding and sealing with a food-grade finish. There are no moving blades in this class instruction.

This class is highly recommended for anyone who needs an unusual wedding or birthday gift.

In Session 1 participants will:

· Learn to distinguish end grain from edge grain;

· Discover their inner designer (do you prefer random or ordered patterns??)

· Assemble their creation and use clamps to glue them together.

* All materials are provided.

** Classes are transferable, but not refundable. Only transferable up to 48 hours before class. **

*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***

In this class, students will learn how to fabricate an end table base out of mild steel from start to finish!

From learning how to read a drawing, to measuring, cutting, drilling, tapping, layout, clamping, welding, and blending - students will experience robust use of the metal shop with the following tools:

• measuring tools

• horizontal band saw

• drill press

• taps

• clamps

• MIG welder

• angle grinder and cut off wheel

• pneumatic tools

After these two class sessions, students will have a 24” x 18” base to an end table. Come take a class in our wood shop to learn how to make a top for it!

All materials, PPE will be provided, as well as some snacks and drinks!. Four students max. 

** Classes are transferable up to 48 hours before class, but not refundable.