Level: Intermediate
Prerequisite: Intro to MIG Welding, or prior outside MIG welding experience. Please do not enroll if you do not meet these requirements.
Approx. Duration: 8 Hours with a break for lunch. Lunch provided.
Instructor: Various
Class Enrollment Closure & Minimum: Enrollment closes 3 days prior to date of class. Any last minute enrollments must be approved prior to sign up. This class is subject to a minimum enrollment requirement set by the instructor. Please note that any session may be rescheduled or cancelled if not enough students are enrolled.
In this Metal Shop intensive, students will learn how to fabricate an end table base out of mild steel. This is a complete start to finish project that outlines all necessary steps from planning, preparing, fabricating and finishing, which will result in a 24” x 18” table base.
Students will learn how to read a drawing, measure, cut, drill, tap, layout, clamp, weld, and blend. You will also become familiar with a wide array of metalworking tools such as:
Measuring tools
Horizontal band saw
Drill press
Taps
Clamps
MIG welder
Angle grinder and cut off wheel
Pneumatic tools
All materials and PPE will be provided, and a pizza lunch is provided.
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
Level: Intermediate
Prerequisite: Intro to MIG Welding, or prior outside MIG welding experience. Please do not enroll if you do not meet these requirements.
Approx. Duration: 8 Hours with a break for lunch. Lunch provided.
Instructor: Various
Class Enrollment Closure & Minimum: Enrollment closes 3 days prior to date of class. Any last minute enrollments must be approved prior to sign up. This class is subject to a minimum enrollment requirement set by the instructor. Please note that any session may be rescheduled or cancelled if not enough students are enrolled.
In this Metal Shop intensive, students will learn how to fabricate an end table base out of mild steel. This is a complete start to finish project that outlines all necessary steps from planning, preparing, fabricating and finishing, which will result in a 24” x 18” table base.
Students will learn how to read a drawing, measure, cut, drill, tap, layout, clamp, weld, and blend. You will also become familiar with a wide array of metalworking tools such as:
Measuring tools
Horizontal band saw
Drill press
Taps
Clamps
MIG welder
Angle grinder and cut off wheel
Pneumatic tools
All materials and PPE will be provided, and a pizza lunch is provided.
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
