UPCOMING CLASSES
Beginner Silversmithing
Learn the art of Silversmithing!
Beginners welcome! In this class we will learn the core skills of silversmithing over the course of one fun-filled day.
You will learn:
foundational skills and techniques of silversmithing
how to make (and take home) a set of sterling silver stacking rings
how to make (and take home) your very own ring with a bezel set stone
We will use torches and work with hot materials, so please wear closed toed shoes, long pants, and wear your hair up, if necessary.
After class, you’ll go home with all of your new handmade sterling silver jewelry, a binder full of resources on suppliers, trouble shooting tips, and reference sheets for the skills you acquired in class, as well as access to Jenny’s online beginner’s silversmithing course so you can refer back to video recorded content of the steps we cover in class.
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
About the Instructor:
Jenny is a full-time silversmith operating her jewelry business Sedona Rose Studio from her home in the hills outside of Nashville. You can check out her Instagram, as well.
She has taught silversmithing to hundreds of students in-person and online and many of them have gone on to create jewelry businesses of their own. She wants to share her love for this trade and the fulfillment it brings with as many people as possible.
Introduction to Knife Forging workshop, Part 1
^^ IF CLASS IS OUT OF STOCK, CLICK ON THE LINK ABOVE TO JOIN THE WAITLIST! ^^
** LEARN HOW TO FORGE A CHEF’S KNIFE AND TAKE IT HOME**
The Intro to Knife Forging class is a two day class.
9am-5pm, both days - May run over an extra hour or two.
Lunch is provided & beers to share after class!
In this Introduction to Knife Forging, we will focus on the fundamentals of what makes a great culinary knife. From steel type and heat treat to shaping and finishing techniques, we will set the student up with the basic knowledge and hands-on learning to get started in knife making. This is a forging class. Students will hammer, grind, and finish their blade before shaping and attaching their handle. We purposely designed this class with a maximum of 4 students so that you have dedicated one-on-one time with the instructor.
This two day, 16 hour class will consist of classroom as well as shop time. The student will walk home with an 8" Chef’s knife. Lunch at noon and beers/beverages after class will be provided.
What students should have / could bring:
Work clothes (non-flammable)
No loose clothing/hair/jewelry
Closed toe shoes
Safety Glasses
Respirator/Dust mask
Water Bottle
Notepad
What students will get out of the class:
Forging Basics
Kitchen knife geometry, ergonomics, design & function
Knife grinding techniques
Knife assembly techniques
Handle shaping
Heat treating basics
Steel and wood care and upkeep
Walk home with a hand-forged kitchen knife that YOU made!
* All materials provided, including lunch on both days.
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
About the Instructor:
Duncan Stephenson is the owner and maker at Horn & Heel. A professional bladesmith of 9 Years with a BFA in Metal Design from East Carolina University, specializing in culinary knives. He joined The Forge Makers Community in April 2021, by way of North Carolina. Check out his stunning work here: hornandheel.com
Introduction to Knife Forging workshop, Part 2
^^ IF CLASS IS OUT OF STOCK, CLICK ON THE LINK ABOVE TO JOIN THE WAITLIST! ^^
** LEARN HOW TO FORGE A CHEF’S KNIFE AND TAKE IT HOME**
The Intro to Knife Forging class is a two day class.
9am-5pm, both days - May run over an extra hour or two.
Lunch is provided & beers to share after class!
In this Introduction to Knife Forging, we will focus on the fundamentals of what makes a great culinary knife. From steel type and heat treat to shaping and finishing techniques, we will set the student up with the basic knowledge and hands-on learning to get started in knife making. This is a forging class. Students will hammer, grind, and finish their blade before shaping and attaching their handle. We purposely designed this class with a maximum of 4 students so that you have dedicated one-on-one time with the instructor.
This two day, 16 hour class will consist of classroom as well as shop time. The student will walk home with an 8" Chef’s knife. Lunch at noon and beers/beverages after class will be provided.
What students should have / could bring:
Work clothes (non-flammable)
No loose clothing/hair/jewelry
Closed toe shoes
Safety Glasses
Respirator/Dust mask
Water Bottle
Notepad
What students will get out of the class:
Forging Basics
Kitchen knife geometry, ergonomics, design & function
Knife grinding techniques
Knife assembly techniques
Handle shaping
Heat treating basics
Steel and wood care and upkeep
Walk home with a hand-forged kitchen knife that YOU made!
* All materials provided, including lunch on both days.
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
About the Instructor:
Duncan Stephenson is the owner and maker at Horn & Heel. A professional bladesmith of 9 Years with a BFA in Metal Design from East Carolina University, specializing in culinary knives. He joined The Forge Makers Community in April 2021, by way of North Carolina. Check out his stunning work here: hornandheel.com
FUTURE MAKERS: Metal Shop 301 for Teens, Part 1
Level: Intermediate
Semester: Spring 2026 (3/16, 3/23, 4/6, 4/20) 9am-1pm
Duration: 4 part series - 4 hours per session
Age Range: 12-18 Years
Pre-Requisite: Metal Shop 201
In this semester-long, four-class series, students build on the skills learned in Metal Shop 101 & 201 for Teens by applying welding and metal fabrication techniques to design and build a scooter.
Attendance is required at all dates to complete your project, and you must attend the first day in order to proceed with any subsequent sessions. There are no make-up dates for missed sessions.
All needed materials for this class will be supplied to students by The Forge.
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
FUTURE MAKERS & The Curve: Metal Shop 301 for Teens, Part 2
FUTURE MAKERS & THE CURVE: METAL SHOP 301 FOR TEENS
Level: Intermediate
Semester: Spring 2026 (3/6, 3/20, 4/3, 4/17) 9am-1pm
Duration: 4 part series - 4 hours per session
Age Range: 12-18 Years
Pre-Requisite: Metal Shop 201
To enroll, please contact Mitchell Green, Director of Future Makers: mitchell@theforgenashville.org
The Forge Nashville & The Curve have partners to create this semester-long, four-class series. Students will build on the skills learned in Metal Shop 101 & 201 for Teens by applying welding and metal fabrication techniques to design and build a scooter.
Attendance is required at all dates to complete your project, and you must attend the first day in order to proceed with any subsequent sessions. There are no make-up dates for missed sessions.
All needed materials for this class will be supplied to students by The Forge.
** Classes are non-transferable and non-refundable.
FUTURE MAKERS: Metal Shop 301 for Teen, Part 2
Level: Intermediate
Semester: Spring 2026 (3/16, 3/23, 4/6, 4/20) 9am-1pm
Duration: 4 part series - 4 hours per session
Age Range: 12-18 Years
Pre-Requisite: Metal Shop 201
In this semester-long, four-class series, students build on the skills learned in Metal Shop 101 & 201 for Teens by applying welding and metal fabrication techniques to design and build a scooter.
Attendance is required at all dates to complete your project, and you must attend the first day in order to proceed with any subsequent sessions. There are no make-up dates for missed sessions.
All needed materials for this class will be supplied to students by The Forge.
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
Intro to TIG Welding
*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***
Intro to TIG Welding will be an intensive tool and process orientation class on the TIG welder. Students will learn how to safely weld mild steel stock with multiple joint styles.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max.
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
FUTURE MAKERS & The Curve: Metal Shop 301 for Teens, Part 3
FUTURE MAKERS & THE CURVE: METAL SHOP 301 FOR TEENS
Level: Intermediate
Semester: Spring 2026 (3/6, 3/20, 4/3, 4/17) 9am-1pm
Duration: 4 part series - 4 hours per session
Age Range: 12-18 Years
Pre-Requisite: Metal Shop 201
To enroll, please contact Mitchell Green, Director of Future Makers: mitchell@theforgenashville.org
The Forge Nashville & The Curve have partners to create this semester-long, four-class series. Students will build on the skills learned in Metal Shop 101 & 201 for Teens by applying welding and metal fabrication techniques to design and build a scooter.
Attendance is required at all dates to complete your project, and you must attend the first day in order to proceed with any subsequent sessions. There are no make-up dates for missed sessions.
All needed materials for this class will be supplied to students by The Forge.
** Classes are non-transferable and non-refundable.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
FUTURE MAKERS: Metal Shop 301 for Teens, Part 3
Level: Intermediate
Semester: Spring 2026 (3/16, 3/23, 4/6, 4/20) 9am-1pm
Duration: 4 part series - 4 hours per session
Age Range: 12-18 Years
Pre-Requisite: Metal Shop 201
In this semester-long, four-class series, students build on the skills learned in Metal Shop 101 & 201 for Teens by applying welding and metal fabrication techniques to design and build a scooter.
Attendance is required at all dates to complete your project, and you must attend the first day in order to proceed with any subsequent sessions. There are no make-up dates for missed sessions.
All needed materials for this class will be supplied to students by The Forge.
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
Introduction to Metal Forming - Steel Rose
*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***
In this class, students will learn how to create a beautiful rose with base stand from mild steel.
Students will experience the following tools and processes:
small horizontal band saw
hand tools for metal forming
tack welding with the MIG welder
angle grinder
how the plasma table works
Come increase your knowledge of all that is possible in the metal shop!
All materials and PPE will be provided. Five students max.
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
About the Instructor:
Ethan Warner is a self-taught metal fabricator and founder of EZ Precision Works, established in 2024. With a background in construction, Ethan brings creativity, precision, and a love of problem-solving to every project from architectural fabrication and metal art work to custom vehicle builds. His work reflects his passion for turning imagination into something tangible. Away from the shop, Ethan and his wife, Ryleigh, spend their free time offroad racing, scuba diving, and exploring other adventures alongside their two dogs, Violet and Bandit.
Introduction to Metal Fabrication
*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***
In this class, students will learn how to fabricate an end table base out of mild steel from start to finish!
From learning how to read a drawing, to measuring, cutting, drilling, tapping, layout, clamping, welding, and blending - students will experience robust use of the metal shop with the following tools:
measuring tools
horizontal band saw
drill press
taps
clamps
MIG welder
angle grinder and cut off wheel
pneumatic tools
After this class, students will have a 24” x 18” base of an end table. Come take a class in our wood shop to learn how to make a top for it!
* All materials and PPE will be provided, and a pizza lunch is provided. Four students max.
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
Silversmithing for Beginners
Learn the art of Silversmithing!
Beginners welcome! In this class we will learn the core skills of silversmithing over the course of one fun-filled day.
You will learn:
foundational skills and techniques of silversmithing
how to make (and take home) a set of sterling silver stacking rings
how to make (and take home) your very own ring with a bezel set stone
We will use torches and work with hot materials, so please wear closed toed shoes, long pants, and wear your hair up, if necessary.
After class, you’ll go home with all of your new handmade sterling silver jewelry, a binder full of resources on suppliers, trouble shooting tips, and reference sheets for the skills you acquired in class, as well as access to Jenny’s online beginner’s silversmithing course so you can refer back to video recorded content of the steps we cover in class.
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
About the Instructor:
Jenny is a full-time silversmith operating her jewelry business Sedona Rose Studio from her home in the hills outside of Nashville. You can check out her Instagram, as well.
She has taught silversmithing to hundreds of students in-person and online and many of them have gone on to create jewelry businesses of their own. She wants to share her love for this trade and the fulfillment it brings with as many people as possible.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
FUTURE MAKERS & The Curve: Metal Shop 301 for Teens, Part 4
FUTURE MAKERS & THE CURVE: METAL SHOP 301 FOR TEENS
Level: Intermediate
Semester: Spring 2026 (3/6, 3/20, 4/3, 4/17) 9am-1pm
Duration: 4 part series - 4 hours per session
Age Range: 12-18 Years
Pre-Requisite: Metal Shop 201
To enroll, please contact Mitchell Green, Director of Future Makers: mitchell@theforgenashville.org
The Forge Nashville & The Curve have partners to create this semester-long, four-class series. Students will build on the skills learned in Metal Shop 101 & 201 for Teens by applying welding and metal fabrication techniques to design and build a scooter.
Attendance is required at all dates to complete your project, and you must attend the first day in order to proceed with any subsequent sessions. There are no make-up dates for missed sessions.
All needed materials for this class will be supplied to students by The Forge.
** Classes are non-transferable and non-refundable.
FUTURE MAKERS: Metal Shop 301 for Teens, Part 4
Level: Intermediate
Semester: Spring 2026 (3/16, 3/23, 4/6, 4/20) 9am-1pm
Duration: 4 part series - 4 hours per session
Age Range: 12-18 Years
Pre-Requisite: Metal Shop 201
In this semester-long, four-class series, students build on the skills learned in Metal Shop 101 & 201 for Teens by applying welding and metal fabrication techniques to design and build a scooter.
Attendance is required at all dates to complete your project, and you must attend the first day in order to proceed with any subsequent sessions. There are no make-up dates for missed sessions.
All needed materials for this class will be supplied to students by The Forge.
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Silversmithing for Beginners
Learn the art of Silversmithing!
Beginners welcome! In this class we will learn the core skills of silversmithing over the course of one fun-filled day.
You will learn:
foundational skills and techniques of silversmithing
how to make (and take home) a set of sterling silver stacking rings
how to make (and take home) your very own ring with a bezel set stone
We will use torches and work with hot materials, so please wear closed toed shoes, long pants, and wear your hair up, if necessary.
After class, you’ll go home with all of your new handmade sterling silver jewelry, a binder full of resources on suppliers, trouble shooting tips, and reference sheets for the skills you acquired in class, as well as access to Jenny’s online beginner’s silversmithing course so you can refer back to video recorded content of the steps we cover in class.
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
About the Instructor:
Jenny is a full-time silversmith operating her jewelry business Sedona Rose Studio from her home in the hills outside of Nashville. You can check out her Instagram, as well.
She has taught silversmithing to hundreds of students in-person and online and many of them have gone on to create jewelry businesses of their own. She wants to share her love for this trade and the fulfillment it brings with as many people as possible.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Intro to TIG Welding
*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***
Intro to TIG Welding will be an intensive tool and process orientation class on the TIG welder. Students will learn how to safely weld mild steel stock with multiple joint styles.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max.
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Introduction to Metal Forming - Steel Rose
*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***
In this class, students will learn how to create a beautiful rose with base stand from mild steel.
Students will experience the following tools and processes:
small horizontal band saw
hand tools for metal forming
tack welding with the MIG welder
angle grinder
how the plasma table works
Come increase your knowledge of all that is possible in the metal shop!
All materials and PPE will be provided. Five students max.
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
About the Instructor:
Ethan Warner is a self-taught metal fabricator and founder of EZ Precision Works, established in 2024. With a background in construction, Ethan brings creativity, precision, and a love of problem-solving to every project from architectural fabrication and metal art work to custom vehicle builds. His work reflects his passion for turning imagination into something tangible. Away from the shop, Ethan and his wife, Ryleigh, spend their free time offroad racing, scuba diving, and exploring other adventures alongside their two dogs, Violet and Bandit.
Introduction to Metal Fabrication
*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***
In this class, students will learn how to fabricate an end table base out of mild steel from start to finish!
From learning how to read a drawing, to measuring, cutting, drilling, tapping, layout, clamping, welding, and blending - students will experience robust use of the metal shop with the following tools:
measuring tools
horizontal band saw
drill press
taps
clamps
MIG welder
angle grinder and cut off wheel
pneumatic tools
After this class, students will have a 24” x 18” base of an end table. Come take a class in our wood shop to learn how to make a top for it!
* All materials and PPE will be provided, and a pizza lunch is provided. Four students max.
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
Intermediate Silversmithing
** Silversmithing for Beginners is a pre-requisite to taking this class
Come back and learn how to make earrings and a necklace!
You will learn:
intermediate skills and techniques of silversmithing
how to make (and take home) pair of sterling silver earrings with either a post-back or earring wires
how to make (and take home) your very own sterling silver pendant necklace.
We will use torches and work with hot materials, so please wear closed toed shoes, long pants, and wear your hair up, if necessary.
After class, you’ll go home with all of your new handmade sterling silver jewelry, a binder full of resources on suppliers, trouble shooting tips, and reference sheets for the skills you acquired in class, as well as access to Jenny’s online intermediate silversmithing course so you can refer back to video recorded content of the steps we cover in class.
* All Materials and PPE are included in the class fee.
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
About the Instructor:
Jenny is a full-time silversmith operating her jewelry business Sedona Rose Studio from her home in the hills outside of Nashville. You can check out her Instagram, as well.
She has taught silversmithing to hundreds of students in-person and online and many of them have gone on to create jewelry businesses of their own. She wants to share her love for this trade and the fulfillment it brings with as many people as possible.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Intro to TIG Welding
*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***
Intro to TIG Welding will be an intensive tool and process orientation class on the TIG welder. Students will learn how to safely weld mild steel stock with multiple joint styles.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max.
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
Silversmithing for Beginners
Learn the art of Silversmithing!
Beginners welcome! In this class we will learn the core skills of silversmithing over the course of one fun-filled day.
You will learn:
foundational skills and techniques of silversmithing
how to make (and take home) a set of sterling silver stacking rings
how to make (and take home) your very own ring with a bezel set stone
We will use torches and work with hot materials, so please wear closed toed shoes, long pants, and wear your hair up, if necessary.
After class, you’ll go home with all of your new handmade sterling silver jewelry, a binder full of resources on suppliers, trouble shooting tips, and reference sheets for the skills you acquired in class, as well as access to Jenny’s online beginner’s silversmithing course so you can refer back to video recorded content of the steps we cover in class.
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
About the Instructor:
Jenny is a full-time silversmith operating her jewelry business Sedona Rose Studio from her home in the hills outside of Nashville. You can check out her Instagram, as well.
She has taught silversmithing to hundreds of students in-person and online and many of them have gone on to create jewelry businesses of their own. She wants to share her love for this trade and the fulfillment it brings with as many people as possible.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Introduction to Metal Forming - Steel Rose
*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***
In this class, students will learn how to create a beautiful rose with base stand from mild steel.
Students will experience the following tools and processes:
small horizontal band saw
hand tools for metal forming
tack welding with the MIG welder
angle grinder
how the plasma table works
Come increase your knowledge of all that is possible in the metal shop!
All materials and PPE will be provided. Five students max.
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
About the Instructor:
Ethan Warner is a self-taught metal fabricator and founder of EZ Precision Works, established in 2024. With a background in construction, Ethan brings creativity, precision, and a love of problem-solving to every project from architectural fabrication and metal art work to custom vehicle builds. His work reflects his passion for turning imagination into something tangible. Away from the shop, Ethan and his wife, Ryleigh, spend their free time offroad racing, scuba diving, and exploring other adventures alongside their two dogs, Violet and Bandit.
Silversmithing for Beginners
Learn the art of Silversmithing!
Beginners welcome! In this class we will learn the core skills of silversmithing over the course of one fun-filled day.
You will learn:
foundational skills and techniques of silversmithing
how to make (and take home) a set of sterling silver stacking rings
how to make (and take home) your very own ring with a bezel set stone
We will use torches and work with hot materials, so please wear closed toed shoes, long pants, and wear your hair up, if necessary.
After class, you’ll go home with all of your new handmade sterling silver jewelry, a binder full of resources on suppliers, trouble shooting tips, and reference sheets for the skills you acquired in class, as well as access to Jenny’s online beginner’s silversmithing course so you can refer back to video recorded content of the steps we cover in class.
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
About the Instructor:
Jenny is a full-time silversmith operating her jewelry business Sedona Rose Studio from her home in the hills outside of Nashville. You can check out her Instagram, as well.
She has taught silversmithing to hundreds of students in-person and online and many of them have gone on to create jewelry businesses of their own. She wants to share her love for this trade and the fulfillment it brings with as many people as possible.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Intermediate Silversmithing
** Silversmithing for Beginners is a pre-requisite to taking this class
Come back and learn how to make earrings and a necklace!
You will learn:
intermediate skills and techniques of silversmithing
how to make (and take home) pair of sterling silver earrings with either a post-back or earring wires
how to make (and take home) your very own sterling silver pendant necklace.
We will use torches and work with hot materials, so please wear closed toed shoes, long pants, and wear your hair up, if necessary.
After class, you’ll go home with all of your new handmade sterling silver jewelry, a binder full of resources on suppliers, trouble shooting tips, and reference sheets for the skills you acquired in class, as well as access to Jenny’s online intermediate silversmithing course so you can refer back to video recorded content of the steps we cover in class.
* All Materials and PPE are included in the class fee.
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
About the Instructor:
Jenny is a full-time silversmith operating her jewelry business Sedona Rose Studio from her home in the hills outside of Nashville. You can check out her Instagram, as well.
She has taught silversmithing to hundreds of students in-person and online and many of them have gone on to create jewelry businesses of their own. She wants to share her love for this trade and the fulfillment it brings with as many people as possible.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Intro to TIG Welding
*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***
Intro to TIG Welding will be an intensive tool and process orientation class on the TIG welder. Students will learn how to safely weld mild steel stock with multiple joint styles.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max.
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Silversmithing for Beginners
Learn the art of Silversmithing!
Beginners welcome! In this class we will learn the core skills of silversmithing over the course of one fun-filled day.
You will learn:
foundational skills and techniques of silversmithing
how to make (and take home) a set of sterling silver stacking rings
how to make (and take home) your very own ring with a bezel set stone
We will use torches and work with hot materials, so please wear closed toed shoes, long pants, and wear your hair up, if necessary.
After class, you’ll go home with all of your new handmade sterling silver jewelry, a binder full of resources on suppliers, trouble shooting tips, and reference sheets for the skills you acquired in class, as well as access to Jenny’s online beginner’s silversmithing course so you can refer back to video recorded content of the steps we cover in class.
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
About the Instructor:
Jenny is a full-time silversmith operating her jewelry business Sedona Rose Studio from her home in the hills outside of Nashville. You can check out her Instagram, as well.
She has taught silversmithing to hundreds of students in-person and online and many of them have gone on to create jewelry businesses of their own. She wants to share her love for this trade and the fulfillment it brings with as many people as possible.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Introduction to Metal Forming - Steel Rose
*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***
In this class, students will learn how to create a beautiful rose with base stand from mild steel.
Students will experience the following tools and processes:
small horizontal band saw
hand tools for metal forming
tack welding with the MIG welder
angle grinder
how the plasma table works
Come increase your knowledge of all that is possible in the metal shop!
All materials and PPE will be provided. Five students max.
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
About the Instructor:
Ethan Warner is a self-taught metal fabricator and founder of EZ Precision Works, established in 2024. With a background in construction, Ethan brings creativity, precision, and a love of problem-solving to every project from architectural fabrication and metal art work to custom vehicle builds. His work reflects his passion for turning imagination into something tangible. Away from the shop, Ethan and his wife, Ryleigh, spend their free time offroad racing, scuba diving, and exploring other adventures alongside their two dogs, Violet and Bandit.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Silversmithing for Beginners
Learn the art of Silversmithing!
Beginners welcome! In this class we will learn the core skills of silversmithing over the course of one fun-filled day.
You will learn:
foundational skills and techniques of silversmithing
how to make (and take home) a set of sterling silver stacking rings
how to make (and take home) your very own ring with a bezel set stone
We will use torches and work with hot materials, so please wear closed toed shoes, long pants, and wear your hair up, if necessary.
After class, you’ll go home with all of your new handmade sterling silver jewelry, a binder full of resources on suppliers, trouble shooting tips, and reference sheets for the skills you acquired in class, as well as access to Jenny’s online beginner’s silversmithing course so you can refer back to video recorded content of the steps we cover in class.
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
About the Instructor:
Jenny is a full-time silversmith operating her jewelry business Sedona Rose Studio from her home in the hills outside of Nashville. You can check out her Instagram, as well.
She has taught silversmithing to hundreds of students in-person and online and many of them have gone on to create jewelry businesses of their own. She wants to share her love for this trade and the fulfillment it brings with as many people as possible.
Intro to TIG Welding
*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***
Intro to TIG Welding will be an intensive tool and process orientation class on the TIG welder. Students will learn how to safely weld mild steel stock with multiple joint styles.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max.
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Intermediate Silversmithing
** Silversmithing for Beginners is a pre-requisite to taking this class
Come back and learn how to make earrings and a necklace!
You will learn:
intermediate skills and techniques of silversmithing
how to make (and take home) pair of sterling silver earrings with either a post-back or earring wires
how to make (and take home) your very own sterling silver pendant necklace.
We will use torches and work with hot materials, so please wear closed toed shoes, long pants, and wear your hair up, if necessary.
After class, you’ll go home with all of your new handmade sterling silver jewelry, a binder full of resources on suppliers, trouble shooting tips, and reference sheets for the skills you acquired in class, as well as access to Jenny’s online intermediate silversmithing course so you can refer back to video recorded content of the steps we cover in class.
* All Materials and PPE are included in the class fee.
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
About the Instructor:
Jenny is a full-time silversmith operating her jewelry business Sedona Rose Studio from her home in the hills outside of Nashville. You can check out her Instagram, as well.
She has taught silversmithing to hundreds of students in-person and online and many of them have gone on to create jewelry businesses of their own. She wants to share her love for this trade and the fulfillment it brings with as many people as possible.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
FUTURE MAKERS & The Curve: Metal Shop 301 for Teens, Part 1
FUTURE MAKERS & THE CURVE: METAL SHOP 301 FOR TEENS
Level: Intermediate
Semester: Spring 2026 (3/6, 3/20, 4/3, 4/17) 9am-1pm
Duration: 4 part series - 4 hours per session
Age Range: 12-18 Years
Pre-Requisite: Metal Shop 201
To enroll, please contact Mitchell Green, Director of Future Makers: mitchell@theforgenashville.org
The Forge Nashville & The Curve have partners to create this semester-long, four-class series. Students will build on the skills learned in Metal Shop 101 & 201 for Teens by applying welding and metal fabrication techniques to design and build a scooter.
Attendance is required at all dates to complete your project, and you must attend the first day in order to proceed with any subsequent sessions. There are no make-up dates for missed sessions.
All needed materials for this class will be supplied to students by The Forge.
** Classes are non-transferable and non-refundable.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Introduction to Knife Forging workshop
^^ IF CLASS IS OUT OF STOCK, CLICK ON THE LINK ABOVE TO JOIN THE WAITLIST! ^^
** LEARN HOW TO FORGE A CHEF’S KNIFE AND TAKE IT HOME**
The Intro to Knife Forging class is a two day class.
9am-5pm, both days - May run over an extra hour or two.
Lunch is provided & beers to share after class!
In this Introduction to Knife Forging, we will focus on the fundamentals of what makes a great culinary knife. From steel type and heat treat to shaping and finishing techniques, we will set the student up with the basic knowledge and hands-on learning to get started in knife making. This is a forging class. Students will hammer, grind, and finish their blade before shaping and attaching their handle. We purposely designed this class with a maximum of 4 students so that you have dedicated one-on-one time with the instructor.
This two day, 16 hour class will consist of classroom as well as shop time. The student will walk home with an 8" Chef’s knife. Lunch at noon and beers/beverages after class will be provided.
What students should have / could bring:
Work clothes (non-flammable)
No loose clothing/hair/jewelry
Closed toe shoes
Safety Glasses
Respirator/Dust mask
Water Bottle
Notepad
What students will get out of the class:
Forging Basics
Kitchen knife geometry, ergonomics, design & function
Knife grinding techniques
Knife assembly techniques
Handle shaping
Heat treating basics
Steel and wood care and upkeep
Walk home with a hand-forged kitchen knife that YOU made!
* All materials provided, including lunch on both days.
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
About the Instructor:
Duncan Stephenson is the owner and maker at Horn & Heel. A professional bladesmith of 9 Years with a BFA in Metal Design from East Carolina University, specializing in culinary knives. He joined The Forge Makers Community in April 2021, by way of North Carolina. Check out his stunning work here: hornandheel.com
FUTURE MAKERS: Metal Shop for Teens 201, Part 4
In this semester-long, four class series, we continue to build on the skills learned in Metal Shop for Teens 101, with a focused, project-based curriculum.
* Tuition includes all materials
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
** Inquire for more details - mitchell@theforgenashville.org
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Silversmithing for Beginners
Learn the art of Silversmithing!
Beginners welcome! In this class we will learn the core skills of silversmithing over the course of one fun-filled day.
You will learn:
foundational skills and techniques of silversmithing
how to make (and take home) a set of sterling silver stacking rings
how to make (and take home) your very own ring with a bezel set stone
We will use torches and work with hot materials, so please wear closed toed shoes, long pants, and wear your hair up, if necessary.
After class, you’ll go home with all of your new handmade sterling silver jewelry, a binder full of resources on suppliers, trouble shooting tips, and reference sheets for the skills you acquired in class, as well as access to Jenny’s online beginner’s silversmithing course so you can refer back to video recorded content of the steps we cover in class.
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
About the Instructor:
Jenny is a full-time silversmith operating her jewelry business Sedona Rose Studio from her home in the hills outside of Nashville. You can check out her Instagram, as well.
She has taught silversmithing to hundreds of students in-person and online and many of them have gone on to create jewelry businesses of their own. She wants to share her love for this trade and the fulfillment it brings with as many people as possible.
Introduction to Metal Fabrication
*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***
In this class, students will learn how to fabricate an end table base out of mild steel from start to finish!
From learning how to read a drawing, to measuring, cutting, drilling, tapping, layout, clamping, welding, and blending - students will experience robust use of the metal shop with the following tools:
measuring tools
horizontal band saw
drill press
taps
clamps
MIG welder
angle grinder and cut off wheel
pneumatic tools
After this class, students will have a 24” x 18” base of an end table. Come take a class in our wood shop to learn how to make a top for it!
* All materials and PPE will be provided, and a pizza lunch is provided. Four students max.
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
FUTURE MAKERS: Metal Shop for Teens 201, Part 3
In this semester-long, four class series, we continue to build on the skills learned in Metal Shop for Teens 101, with a focused, project-based curriculum.
* Tuition includes all materials
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
** Inquire for more details - mitchell@theforgenashville.org
Intermediate Silversmithing
** Silversmithing for Beginners is a pre-requisite to taking this class
Come back and learn how to make earrings and a necklace!
You will learn:
intermediate skills and techniques of silversmithing
how to make (and take home) pair of sterling silver earrings with either a post-back or earring wires
how to make (and take home) your very own sterling silver pendant necklace.
We will use torches and work with hot materials, so please wear closed toed shoes, long pants, and wear your hair up, if necessary.
After class, you’ll go home with all of your new handmade sterling silver jewelry, a binder full of resources on suppliers, trouble shooting tips, and reference sheets for the skills you acquired in class, as well as access to Jenny’s online intermediate silversmithing course so you can refer back to video recorded content of the steps we cover in class.
* All Materials and PPE are included in the class fee.
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
About the Instructor:
Jenny is a full-time silversmith operating her jewelry business Sedona Rose Studio from her home in the hills outside of Nashville. You can check out her Instagram, as well.
She has taught silversmithing to hundreds of students in-person and online and many of them have gone on to create jewelry businesses of their own. She wants to share her love for this trade and the fulfillment it brings with as many people as possible.
FUTURE MAKERS: Metal Shop for Teens 201, Part 2
In this semester-long, four class series, we continue to build on the skills learned in Metal Shop for Teens 101, with a focused, project-based curriculum.
* Tuition includes all materials
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
** Inquire for more details - mitchell@theforgenashville.org
Intro to TIG Welding
*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***
Intro to TIG Welding will be an intensive tool and process orientation class on the TIG welder. Students will learn how to safely weld mild steel stock with multiple joint styles.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max.
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Silversmithing for Beginners
Learn the art of Silversmithing!
Beginners welcome! In this class we will learn the core skills of silversmithing over the course of one fun-filled day.
You will learn:
foundational skills and techniques of silversmithing
how to make (and take home) a set of sterling silver stacking rings
how to make (and take home) your very own ring with a bezel set stone
We will use torches and work with hot materials, so please wear closed toed shoes, long pants, and wear your hair up, if necessary.
After class, you’ll go home with all of your new handmade sterling silver jewelry, a binder full of resources on suppliers, trouble shooting tips, and reference sheets for the skills you acquired in class, as well as access to Jenny’s online beginner’s silversmithing course so you can refer back to video recorded content of the steps we cover in class.
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
About the Instructor:
Jenny is a full-time silversmith operating her jewelry business Sedona Rose Studio from her home in the hills outside of Nashville. You can check out her Instagram, as well.
She has taught silversmithing to hundreds of students in-person and online and many of them have gone on to create jewelry businesses of their own. She wants to share her love for this trade and the fulfillment it brings with as many people as possible.
FUTURE MAKERS: Metal Shop for Teens 201, Part 1
In this semester-long, four class series, we continue to build on the skills learned in Metal Shop for Teens 101, with a focused, project-based curriculum.
* Tuition includes all materials
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
** Inquire for more details - mitchell@theforgenashville.org
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Introduction to Metal Fabrication
*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***
In this class, students will learn how to fabricate an end table base out of mild steel from start to finish!
From learning how to read a drawing, to measuring, cutting, drilling, tapping, layout, clamping, welding, and blending - students will experience robust use of the metal shop with the following tools:
measuring tools
horizontal band saw
drill press
taps
clamps
MIG welder
angle grinder and cut off wheel
pneumatic tools
After this class, students will have a 24” x 18” base of an end table. Come take a class in our wood shop to learn how to make a top for it!
* All materials and PPE will be provided, and a pizza lunch is provided. Four students max.
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Silversmithing for Beginners
Learn the art of Silversmithing!
Beginners welcome! In this class we will learn the core skills of silversmithing over the course of one fun-filled day.
You will learn:
foundational skills and techniques of silversmithing
how to make (and take home) a set of sterling silver stacking rings
how to make (and take home) your very own ring with a bezel set stone
We will use torches and work with hot materials, so please wear closed toed shoes, long pants, and wear your hair up, if necessary.
After class, you’ll go home with all of your new handmade sterling silver jewelry, a binder full of resources on suppliers, trouble shooting tips, and reference sheets for the skills you acquired in class, as well as access to Jenny’s online beginner’s silversmithing course so you can refer back to video recorded content of the steps we cover in class.
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
About the Instructor:
Jenny is a full-time silversmith operating her jewelry business Sedona Rose Studio from her home in the hills outside of Nashville. You can check out her Instagram, as well.
She has taught silversmithing to hundreds of students in-person and online and many of them have gone on to create jewelry businesses of their own. She wants to share her love for this trade and the fulfillment it brings with as many people as possible.
Intro to TIG Welding
*** Intro to MIG Welding or MIG Welding experience is required before taking this class ***
Intro to TIG Welding will be an intensive tool and process orientation class on the TIG welder. Students will learn how to safely weld mild steel stock with multiple joint styles.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max.
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
Intro to MIG Welding
Intro to MIG Welding
$150.00
Intro to MIG Welding will be an intensive tool and process orientation class on the MIG welder. Students will learn how to safely weld mild steel stock, multiple joint styles, and walk away with a steel pen holder project.
Each student will get hands-on practice with their own welder, and leave with a small finished project. All materials and PPE will be provided. 4 students max. This class is a pre-requisite for Metal Fabrication 1 and 2.
Intermediate Silversmithing
** Silversmithing for Beginners is a pre-requisite to taking this class
Come back and learn how to make earrings and a necklace!
You will learn:
intermediate skills and techniques of silversmithing
how to make (and take home) pair of sterling silver earrings with either a post-back or earring wires
how to make (and take home) your very own sterling silver pendant necklace.
We will use torches and work with hot materials, so please wear closed toed shoes, long pants, and wear your hair up, if necessary.
After class, you’ll go home with all of your new handmade sterling silver jewelry, a binder full of resources on suppliers, trouble shooting tips, and reference sheets for the skills you acquired in class, as well as access to Jenny’s online intermediate silversmithing course so you can refer back to video recorded content of the steps we cover in class.
* All Materials and PPE are included in the class fee.
All class enrollments are subject to a no-refund, no-trasfer policy. By purchasing a class, or gifting a class, you are agreeing to our policy. Please read the full FAQ and policy here: https://www.theforgenashville.org/class-policy-and-faq
About the Instructor:
Jenny is a full-time silversmith operating her jewelry business Sedona Rose Studio from her home in the hills outside of Nashville. You can check out her Instagram, as well.
She has taught silversmithing to hundreds of students in-person and online and many of them have gone on to create jewelry businesses of their own. She wants to share her love for this trade and the fulfillment it brings with as many people as possible.
